X13SEI-F

Form Factor: EATX
Dimension: 12.3″ x 10.1″ (31.24cm x 25.65cm)
CPU: 5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors Single Socket E (LGA-1700) supported, CPU TDP supports Up to 350W TDP *BIOS 2.1 or above is required to support 5th Gen Intel® Xeon® Scalable processors
Core: Up to 64 cores
Memory Capacity: 8 DIMM slots Up to 2TB 3DSECC RDIMM, DDR5-5600MT/s **24GB & 48GB DIMM only support 1 DPC. *24GB/48GB/96GB DDR5 DIMMs with 24Gb chip are only supported by 5th and 4th XCC Gen Intel® Xeon-SP CPU.
Memory Type: 5600/5200/4800/4400/4000 MT/s ECC DDR5 RDIMM (3DS)Up to 256GB of memory with speeds of up to 5600MT/s(1DPC)
DIMM Sizes: 16GB, 24GB,32GB, 48GB,64GB, 96GB, 128GB, 256GB
Memory Voltage: 1.1V
Error Detection: Corrects single-bit errors
Chipset: Intel® C741
SATA: Intel® C741 controller for 10 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2600 BMC
Graphics: 1 Aspeed AST2600 BMC port(s)
Network Controllers: Dual LAN with 1GbE with Intel® I210
SATA: 10 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 port(s) (2 rear) 4 USB 3.2 Gen1 port(s) (2 rear’ 1 via header’ 1 type A)
Video Output: 1 VGA D-Sub Connector port(s)
Serial Port: 1 COMPort(s) (1 header)
DOM: 2 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
PCIe: 2 PCIe 5.0 x16,3 PCIe 5.0 x8,2 PCIe 5.0 x8 PCIe5.0 MCIO connector
M.2: M.2 Interface: 2 PCIe 5.0 x4 Form Factor: 2280/22110 Key: M-Key
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.4SMBIOS 3.5UEFI 2.8 or above
Software: Redfish API, Supermicro Server Manager (SSM), Supermicro Power Manager (SPM), Supermicro Update Manager (SUM), Supermicro SuperDoctor® 5 (SD5), Super Diagnostics Offline (SDO), KVM with dedicated LAN , IPMI 2.0
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V, Memory Voltages, 7-fan status
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN: 7x 4-pin fan headers (up to 7 fans) Fan speed control Overheat LED indication 7 fans with tachometer status monitoring
Other Features: WOL, UID, Node Manager Support, M.2 NGFF connector, Control of power-on for recovery from AC power loss, Chassis intrusion detection, ACPI power management
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)