X12STL-F

Form Factor: microATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: 10th Generation Intel® Pentium® Processor, Intel® Xeon®  E-2300 Processor Single Socket Socket H5 (LGA-1200) supported, CPU TDP supports Up to 95W TDP
Core: Up to 8 cores
Memory Capacity: 4 DIMM slots Up to 128GB Unbuffered ECC UDIMM, DDR4-3200MT/s
Memory Type: 3200/2933/2666 MT/s SDRAM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: Intel® C252
SATA: Intel® C252 controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2600 BMC
Graphics: 1 ASPEED AST2600 BMC port(s)
Network Controllers: Dual LAN with 1GbE with Intel® I210
SATA: 6 SATA3 (6Gbps) port(s)
LAN: 2 1GbE LAN ports
USB: 4 USB 2.0 port(s) (2 via header’ 2 rear) 5 USB 3.2 Gen1 port(s) (2 via header’ 2 rear’ 1 type A)
Video Output: 1 VGA D-Sub Connector port(s)
Serial Port: 2 COMPort(s) (1 header’ 1 rear)
DOM: 2 SuperDOM (Disk on Module) power connector
TPM: 1 TPM Header
PCIe: 1 PCIe 4.0 x8 (in x16 slot),1 PCIe 4.0 x8,1 PCIe 4.0 x4 (in x8 slot),1 PCIe 3.0 x2 (in x4 slot)
M.2: M.2 Interface: 1 PCIe 3.0 x4 Form Factor: 2280/22110 Key: M-Key
BIOS Type: 256MB UEFI
BIOS Features: ACPI 6.0 SMBIOS 3.3 Plug and Play (PnP) RTC (Real Time Clock) Wakeup UEFI 2.7 USB Keyboard support PCI 3.0
Software: Redfish API, Supermicro Server Manager (SSM), Supermicro Update Manager (SUM), Supermicro SuperDoctor® 5 (SD5), Super Diagnostics Offline (SDO), KVM with dedicated LAN , IPMI 2.0
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management
Hardware: Trusted Platform Module (TPM) 2.0
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chipset Voltage, Chassis intrusion header, 6 -fan status, 3.3V standby, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED: UID/Remote UID BMC/IPMI Heartbeat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN: 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors Fan speed control 6 fans with tachometer status monitoring Overheat LED indication
Other Features: WOL, UID, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion detection, ACPI power management
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)