X12SCZ-F

Form Factor: Micro-ATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: Intel® Xeon® W-1200 Processors, 11th/10th Generation Intel® Core™ i9/Core™ i7/Core™ i5/Core™ i3 Processor Single Socket Socket H5 (LGA-1200) supported, CPU TDP supports Up to 125W TDP A graphic integrated CPU is required to have onboard video from the DVI and DP ports
Core: Up to 10 cores
Note: ** Motherboard supports this maximum TDP. Please verify your system can thermally support. **The X12SCZ does not support the Intel 10th/11th generation processor 2M cache SKUs. These processors will not boot with the latest BIOS version.
Memory Capacity: 4 DIMM slots Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2933MT/s
Memory Type: 2933/2666/2400/2133 MT/s
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: Intel® W480E
SATA: Intel® W480E controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s) 1 ASPEED AST2500 BMC port(s)
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210-AT
SATA: 4 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 6 USB 3.2 Gen2 port(s) (4 rear type A’ 2 via header) 6 USB 2.0 port(s) (6 via header)
Video Output: 1 DVI — D port(s), 1 VGA D-Sub Connector port(s), 2 DP++(Dual-Mode DisplayPort) port(s)
Serial Port: 1 COMPort(s) (1 header)
DOM: 1 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM TPM 2.0 onboard
PCIe: 1 PCIe 3.0 x4,1 PCIe 3.0 x16,1 PCIe 3.0 x4 (in x8 slot)
M.2: M.2 Interface: 1 SATA/PCIe 3.0 x4′ 1 CNVi/PCIe 3.0 x1 Form Factor: 2280/22110, 2230 Key: M-Key, E-Key
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.1 SMBIOS 3.1 PCI FW 3.0 UEFI 2.6 RTC (Real Time Clock) Wakeup
Software: Redfish API, Supermicro SuperDoctor® 5 (SD5), Super Diagnostics Offline (SDO), KVM with dedicated LAN , IPMI 2.0
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power Management, ATX Power connector, +12V DC Power Input
Hardware: Trusted Platform Module (TPM) 2.0
Features: Cryptographically Signed Firmware Secure Boot Secure Firmware Updates System Lockdown
Voltage: VBAT, PCH temperature, Memory, CPU, Chassis intrusion header, 5 -fan status, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V
LED: UID/Remote UID Power LED BMC/IPMI Heartbeat LED
Temperature: Thermal Control for 5 Fan Connectors
FAN: 5x 4-pin fan headers (up to 5 fans) Fan speed control Dual Cooling Zone 5 fans with tachometer status monitoring
Other Features: UID, RoHS, M.2 NGFF connector, Dual Cooling Zones, Chassis intrusion header, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)