X11SWN-C

Form Factor: 3.5″ SBC
Dimension: 5.7″ x 4″ (14.6cm x 10.16cm)
CPU: Intel® Celeron® Processor 4305UE Single Socket FCBGA-1528 supported, CPU TDP supports Up to 15W TDP
Core: Up to 2 cores, 2 threads / 2MB Cache
Memory Capacity: 2 DIMM slots Up to 64GB Unbuffered non-ECC SODIMM, DDR4-2133MT/s
Memory Type: 2666/2400/2133 MT/s non-ECC DDR4Unbuffered2133MHz 260pin SODIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Chipset: System on Chip
Audio: ALC 888S HD Audio
Graphics: 1 Intel® UHD Graphics 610 port(s) Dual channel 48-bit LVDS(max. resolution up to 1920×1200@60Hz), _x000D_ HDMI 1.4 (max. resolution up to 4096×2160@30Hz),DP++ (max. resolution up to 4096×2304@60Hz)
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210IT
SATA: I-SATA0 (1x SATA 3.0 Port)
SATA: 1 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 4 USB 2.0 port(s) (4 via header) 4 USB 3.1 Gen2 port(s) (4 rear type A)
Video Output: 1 HDMI port(s), 1 48-bit LVDS port(s), 1 DP++(Dual-Mode DisplayPort) port(s)
Serial Port: 6 COMPort(s) (6 header), (4 x RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
TPM: 1 TPM Chip
Others: 1 HD Audio header Mic-in/Headphone-out (Audio only support at 0~60C) 1 8-bit GPIO header 1 SMBus header 1 System Fan
PCIe: N/A
M.2: Key: B-Key, M-Key, E-Key M.2 2242/3042/2280 B-Key (USB3.0/2.0 x 1,SATA Gen3 x 1) with nano SIM holder’M.2 2230 E-Key (CNVi/PCIe 3.0 x1/USB2)’M.2 2242/2280 M-Key (PCIe 3.0 x4,SATA Gen3 x 1), NVMe support
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.2 SMBIOS 3.0 or later UEFI 2.7 PCI FW 3.0
Software: SuperDoctor® 5, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: ACPI Power Management, CPU thermal trip support for processor protection, +12-24V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper
Voltage: VBAT, System temperature, System level control, Monitors CPU voltages, 3.3V standby, 1.2V (VDIMM), +5V, +3.3V, +12V
LED: Standby alert LED
Temperature: CPU thermal trip support
FAN: 1x 4-pinfan header (up to 1 fan) Thermal control tachometer fan connectors System level control PWM fan speed control Low noise fan speed control Fan speed control
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 8-pin 12-24V DC Power Connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)