X11SSZ-QF

Form Factor: Micro-ATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: Intel® 6th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®, Intel® 6th Generation Core™ i5 series, Intel® 6th Generation Core™ i7 series, Intel® 7th Generation Core™ i3 series, Intel® 7th Generation Core™ i5 series, Intel® 7th Generation Core™ i7 series Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 91W TDP
Note: BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ Processors
Memory Capacity: 4 DIMM slots Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MT/s
Memory Type: 2400/2133/1866 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB
Memory Voltage: 1.2V
Chipset: Intel® Q170 Express
SATA: Intel® Q170 Express controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s) 1 ASPEED AST2400 BMC port(s) 3 Independent Displays, VGA is from BMC.
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210-AT
SATA: 4 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 9 USB 2.0 port(s) (2 rear’ 6 via header’ 1 Type A) 2 USB 3.2 Gen1 port(s) (2 via header) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 VGA port(s), 2 DP (DisplayPort) port(s), 1 DVI — I port(s)
Serial Port: 2 COMPort(s) (2 header)
DOM: 1 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x16 (in x16 slot), 2 PCIe 3.0 x4 (in x8 slot)
BIOS Type: AMI UEFI
BIOS Features: DMI 2.3 PCI 3.0 Plug and Play (PnP) ACPI 5.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 3.0 UEFI 2.3.1
Software: SuperDoctor® 5, NMI, KVM with dedicated LAN, IPMI2.0, AMT, vPro, Watchdog
System Management Software: SuperDoctor 5, IPMIView for Linux/Windows
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 6 -fan status, 1.2V (VDIMM), +5V standby, +5V, +3.3V, +12V, +1.8V
LED: UID/Remote UID CPU / System Overheat LED +5V Standby alert LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI I2C temperature sensing logic
FAN: 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Fan speed control, 6 fans with tachometer status monitoring, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features: WOL, UID, System level control, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, Intel Smart Response Technology
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)