X11SSQ

Form Factor: Micro-ATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: Intel® 6th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®, Intel® 6th Generation Core™ i5 series, Intel® 6th Generation Core™ i7 series, Intel® 7th Generation Core™ i3 series, Intel® 7th Generation Core™ i5 series, Intel® 7th Generation Core™ i7 series Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 91W TDP
Memory Capacity: 4 DIMM slots Up to 64GB Unbuffered non-ECC UDIMM, DDR4-2400MT/s
Memory Type: 2400/2133/1866 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB
Memory Voltage: 1.2V
Chipset: Intel® Q170 Express
SATA: Intel® Q170 Express controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s)
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210-AT
SATA: 6 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 8 USB 2.0 port(s) (4 via header’ 4 rear) 2 USB 3.2 Gen1 port(s) (2 via header) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 DP (DisplayPort) port(s), 1 HDMI port(s), 1 DVI — D port(s)
Serial Port: 4 COMPort(s) (4 header)
TPM: 1 TPM Header
Others: 1 bit GPIO 1 Force On mode by jumper and AC recovery
PCIe: 1 PCIe 3.0 x16, 2 PCIe 3.0 x4, 1 PCIe 3.0 x1 M.2 PCIe x2 M Key 2242/2260/2280, PCIe 3.0 x4 with open slots
M.2: M.2 Interface: 1 PCIe 3.0 x2 Form Factor: 2242/2260/2280
BIOS Type: AMI UEFI
BIOS Features: Plug and Play (PnP) DMI 2.3 USB Keyboard support UEFI 2.3.1 ACPI 5.0 SMBIOS 3.0 PCI 3.0
Software: SuperDoctor® 5, NMI, AMT, vPro, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management, Force Power On by Jumper, Keyboard Wakeup from Soft-Off
Voltage: VBAT, System temperature, System level control, Supports system management utility, Monitors CPU voltages, Memory, Chassis intrusion header, 4 -fan status, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED: Standby alert LED CPU / System Overheat LED
Temperature: CPU thermal trip support Thermal Monitor 2 (TM2) support PECI Adaptive Thermal Monitor, PECI 3.0
FAN: 4x 4-pin fan headers (up to 4 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication, Support 3-pin fans (w/o speed control)
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, Intel Smart Response Technology
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)