X11SSH-LN4F

Form Factor: Micro-ATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: Intel® Celeron®, Intel® Pentium®, Intel® 7th/6th Generation Core i3 series, Intel® Xeon® processor E3-1200 v6/v5 Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 80W TDP
Note: BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® ProcessorE3-1200 v6 series
Memory Capacity: 4 DIMM slots 64GB Unbuffered ECC UDIMM, DDR4-2400MT/s
Memory Type: 2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: Intel® C236
SATA: Intel® C236 controller for 8 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2400 BMC
Graphics: 1 ASPEED AST2400 BMC port(s)
Network Controllers: Quad LAN with Intel® Ethernet Controller I210-AT
USB: 6 USB 2.0 port(s) (4 via header’ 2 rear) 2 USB 3.0 port(s) (2 rear) 3 USB 3 port(s) (2 via header’ 1 type A)
Video Output: 1 VGA port(s)
Serial Port: 2 COMPort(s) (1 header’ 1 rear)
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x8 (in x16 slot), 1 PCIe 3.0 x8, 1 PCIe 3.0 x4 (in x8 slot)
M.2: M.2 Interface: PCIe 3.0 x2 Form Factor: 2280 Key: M-Key
BIOS Type: 128MB SPI Flash EEPROM with AMI BIOS
BIOS Features: Plug and Play (PnP) APM 1.2 PCI 2.3 DMI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1
Software: SuperDoctor® 5, NMI, SUM, SPM, Intel® Node Manager, SSM, IPMI2.0, Watchdog
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management
Voltage: VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI
FAN: 5x 4-pin fan headers (up to 5 fans) Thermal control tachometer fan connectors Fan speed control Overheat LED indication
Other Features: WOL M.2 NGFF connector CPU thermal trip support for processor protection Control of power-on for recovery from AC power loss VHD
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)