X11SRA

Form Factor: ATX
Dimension: 12″ x 9.6″ (30.48cm x 24.38cm)
CPU: Intel® Xeon® W-2100 Processors, Intel® Xeon® W-2200 Processors Single Socket LGA-2066 (Socket R4) supported, CPU TDP supports Up to 165W TDP As Intel® Xeon® Processor W Family
Memory Capacity: 8 DIMM slots Up to 1TB ECC LRDIMM, DDR4-2666MT/s’ Up to 512GB ECC RDIMM, DDR4-2666MT/s (DDR4-2933MHz: RDIMM Max. Memory Capacity 256GB Registered ECC, LRDIMM Max. Memory Capacity 512GB Registered ECC)
Memory Type: 2666/2400/2133/1866/1600 MT/s ECC DDR4 LRDIMM, RDIMMSDRAM 72-bit, 288-pin
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage: 1.2V
Chipset: Intel® C422
SATA: Intel® C422 controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10 *iRST enabled, only SATA2 to SATA5 support RAID.
Audio: ALC 1220 7.1 HD Audio
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Aquantia 5G LAN chip AQC108
USB: 6 USB 2.0 port(s) (4 via header’ 2 rear) 6 USB 3.2 Gen1 port(s) (2 via header’ 4 rear) 2 USB 3.2 Gen2 port(s) (2 type A)
Serial Port: 1 COMPort(s) (1 header)
TPM: 1 TPM Header
PCIe: 3 PCIe 3.0 x16, 1 PCIe 3.0 x4 ***3xPCIe3.0 x16 Slots(8/16/16 (Skylake-W 48 lanes), 1xPCIe3.0x4 slots***
M.2: M.2 Interface: 2 PCIe 3.0 x4, RAID 0,1 Form Factor: 2280/22110 Key: M-Key *M-Key for SSD and Optane(up to Intel POR). Intel VROC Hardware license Key is needed to enable RAID function.
BIOS Type: 256MB UEFI
Software: SuperDoctor® 5, AMT, Watchdog
Voltage: VBAT, System temperature, Monitors CPU voltages, Chassis intrusion header, 3.3V standby, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V, +1.8V, Monitors for CPU Cores, 5 (4-pin)
LED: CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Support to monitor Supermicro AOC temperatures from IPMI or SD 5 PECI
FAN: 5x 4-pin fan headers (up to 5 fans) PWM fan speed control Fan speed control Overheat LED indication
Other Features: WOL, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, Voltage and Frequency Overclocking, Intel Smart Response Technology
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)