X11SPD-F

Form Factor: Proprietary
Dimension: 4.66″ x 18.5″ (11.84cm x 46.99cm)
CPU: 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors Single Socket Socket P (LGA-3647) supported, CPU TDP supports Up to 165W TDP
Core: Up to 24 cores
Note: BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 4 DIMM slots Up to 512GB ECC LRDIMM, DDR4-2933MT/s’ Up to 1TB 3DSECC RDIMM, DDR4-2933MT/s
Memory Type: 2933/2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM (3DS)
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB LRDIMM: 32GB, 64GB, 128GB RDIMM: 8GB, 16GB, 32GB, 64GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: Intel® C621
SATA: Intel® C621 controller for 2 SATA3 (6 Gbps) ports
IPMI: ASPEED AST2500 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: 1 ASPEED AST2500 BMC port(s) Via KVM Connector
Network Controllers: Single LAN with Realtek RTL8211E PHY (dedicated IPMI), via Backplane
SATA: 2 SATA3 (6Gbps) port(s)
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 port(s) (2 rear) USB 2.0 via KVM Connector
Video Output: 1 VGA port(s)
Serial Port: 1 fast UART 16550 Serial 1 COMPort(s) (1 rear), Via KVM Connector
TPM: 1 TPM Header
Others: 1 KVM Connector for VGA 1 USB 0 and COM Ports
PCIe: 1 PCIe 3.0 x8 (Micro Low Profile), 1 PCIe 3.0 x16
M.2: M.2 Interface: 2 SATA/PCIe 3.0 x4 Form Factor: 2280 Key: M-Key
BIOS Type: 256MB UEFI
Software: SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, SUM
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss
Voltage: VBAT, System temperature, System level control, Supports system management utility, Monitors CPU voltages, Memory, HT, +5V standby, +5V, +3.3V, +12V, +1.8V, Monitors for CPU Cores, Memory Voltages
LED: UID/Remote UID Power LED BMC/IPMI Heartbeat LED CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI I2C temperature sensing logic
FAN: Thermal control tachometer fan connectors, System level control, PWM fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features: WOL, UID, System level control, RoHS, M.2 NGFF connector, Control of power-on for recovery from AC power loss
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)