X11SDW-16C-TP13F

Form Factor: Proprietary WIO
Dimension: 8″ x 10″ (20.32cm x 25.4cm)
CPU: Intel® Xeon® Processor D-2183IT Single Socket FCBGA-2518 supported, CPU TDP supports Up to 100W TDP
Core: Up to 16 cores, 32 threads
Memory Capacity: 4 DIMM slots Up to 512GB ECC LRDIMM, DDR4-2400MT/s’ Up to 256GB ECC RDIMM, DDR4-2400MT/s
Memory Type: 2666/2400/2133 MT/s ECC DDR4 LRDIMM, RDIMM(Operating speed up to 2400MHz)
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: System on Chip
SATA: SoC controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500 Support for Intelligent Platform Management Interface v.2.0
Graphics: 1 ASPEED AST2500 BMC port(s) Header Only
Network Controllers: Quad LAN with 1GbE with Intel® I350-AM4 Dual LAN with 10Gbase-T Dual LAN with 10G SFP+ LAN via SoC Quad LAN with Intel® Ethernet Controller I350-AM4, Total 13 LAN ports Single LAN with 1GbE with Intel® I210 Single LAN with Realtek RTL8201N PHY (dedicated IPMI)
SATA: 4 SATA3 port(s)
LAN: 1 RJ45 Dedicated IPMI LAN port 2 10G SFP+ LAN ports 2 RJ45 10GBase-T ports 9 RJ45 Gigabit Ethernet LAN ports
USB: 4 USB 2.0 port(s) (4 via header) 2 USB 3.1 Gen1 port(s) (2 rear type A)
Video Output: 1 VGA port(s)
Serial Port: 2 COMPort(s) (1 header’ 1 rear)
DOM: 1 SuperDOM (Disk on Module) port with build power
TPM: 1 TPM Header & Chip both
PCIe: 1 PCIe 3.0 x32 Left Riser Slot
M.2: M.2 Interface: 1 SATA/PCIe 3.0 x4′ 1 PCIe 3.0 x1′ 1 SATA/PCIe 3.0 x2/USB 3.0 Form Factor: 2280/22110, 2230, 2242 Key: M-Key, E-Key, B-Key
BIOS Type: 256MB UEFI
BIOS Features: ACPI 6.1 SMBIOS 3.1 UEFI 2.7 PCI FW 3.2
Software: SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, Intel® Node Manager, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power Management, +12V DC Power Input, CPU thermal trip support for processor protection
Voltage: System temperature, System level control, Supports system management utility, Memory, HT, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V, +1.5V, Memory Voltages
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment
FAN: 6x 4-pin fan headers (up to 6 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Dual Cooling Zone, 6 fans with tachometer status monitoring, Status monitoring for speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features: WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source, SDDC
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)