X11SCZ-F

Form Factor: uATX
Dimension: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: 8th/9th Generation Intel® Core™ i9/Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Processor, Intel® Xeon®E-2100 Processor, Intel® Xeon®E-2200 Processor Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 95W TDP A graphic integrated CPU is required to have onboard video from the DVI and DP ports
Memory Capacity: 4 DIMM slots Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MT/s
Memory Type: 2666/2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: Intel® C246
SATA: Intel® C246 controller for 5 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s) 1 ASPEED AST2500 BMC port(s) 3 Independent Displays
Network Controllers: Single LAN with Intel® PHY I219LM LAN controller Single LAN with Intel® Ethernet Controller I210-AT
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 6 USB 3.1 Gen2 port(s) (2 via header’ 3 rear type A’ 1 rear type C) 7 USB 2.0 port(s) (6 via header’ 1 Type A) 2 USB 3.1 Gen1 port(s) (2 via header)
Video Output: 1 VGA D-Sub Connector port(s), 2 DP (DisplayPort) port(s), 1 DVI — I port(s)
Serial Port: 4 COMPort(s) (4 header)
DOM: 1 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header & Chip both
PCIe: 1 PCIe 3.0 x16, 2 PCIe 3.0 x4 (in x8 slot)
M.2: M.2 Interface: 1 SATA/PCIe 3.0 x4 Form Factor: 2280/22110 Key: M-Key
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.1 SMBIOS 3.1 PCI FW 3.0 UEFI 2.6 RTC (Real Time Clock) Wakeup
Software: SuperDoctor® 5, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power Management, ATX Power connector, +12V DC Power Input
Voltage: VBAT, System temperature, Monitors CPU voltages, Chassis intrusion header, 6 -fan status, 3.3V standby, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED: UID/Remote UID
Temperature: Thermal Control for 6 Fan Connectors
FAN: 6x 4-pin fan headers (up to 6 fans) Fan speed control Dual Cooling Zone 6 fans with tachometer status monitoring
Other Features: UID, RoHS, M.2 NGFF connector, Dual Cooling Zones, Chassis intrusion header, ATX Power connector, ACPI power management, 8-pin 12v DC power connector, 12V DC or ATX Power Source
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)