X11SCD-F

Form Factor: Proprietary
Dimension: 4.66″ x 18.5″ (11.84cm x 46.99cm)
CPU: Intel® Xeon®E-2100 Processor, Intel® Xeon®E-2200 Processor, Intel® Celeron®, Intel® Pentium®, Intel® Core™ i3  series Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 95W TDP
Memory Capacity: 4 DIMM slots 128GB Unbuffered ECC UDIMM, DDR4-2666MT/s
Memory Type: N/A
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: Intel® C246
SATA: Intel® C246 controller for 2 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: 1 ASPEED AST2500 BMC port(s) Via KVM Connector
Network Controllers: Single LAN with Realtek RTL8211E PHY (dedicated IPMI), via Backplane
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 port(s) (2 rear) USB 2.0 via KVM Connector
Video Output: 1 VGA port(s)
Serial Port: 1 fast UART 16550 Serial 1 COMPort(s) (1 rear), Via KVM Connector
TPM: 1 TPM Header
Others: 1 KVM Connector for VGA 1 USB 0 and COM Ports
PCIe: 1 PCIe 3.0 x8 (Micro Low Profile), 1 PCIe 3.0 x8
M.2: M.2 Interface: 1 SATA/PCIe 3.0 x4′ 1 SATA/PCIe 3.0 x4 Form Factor: 2242/2280, 2242/2280/22110 Key: M-Key, M-Key
BIOS Type: 256MB UEFI
BIOS Features: ACPI 6.2 SMBIOS 3.0 or later PCI FW 3.2 USB Keyboard support Plug and Play (PnP)
Software: SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, SUM
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss
Voltage: VBAT, System temperature, System level control, Supports system management utility, Monitors CPU voltages, Memory, HT, +5V standby, +5V, +3.3V, +12V, +1.8V, Monitors for CPU Cores, Memory Voltages
LED: UID/Remote UID Power LED BMC/IPMI Heartbeat LED CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) support PECI I2C temperature sensing logic
FAN: Thermal control tachometer fan connectors, System level control, PWM fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features: WOL, UID, System level control, RoHS, M.2 NGFF connector, Control of power-on for recovery from AC power loss
Operating Temperature Range: 0°C — 50°C (32°F — 122°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)