Form Factor: Mini-ITX
Dimension: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® Pentium™ Processor N4200 Single Socket FCBGA-1296 supported, CPU TDP supports Up to 6W TDP
Memory Capacity: 1 DIMM slots Up to 8GB Unbuffered non-ECC SODIMM, DDR3-1866MT/s
Memory Type: 1866 MT/s non-ECC DDR3 SODIMM UnbufferedDDR3L up to 8GB
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.35V
Chipset: System on Chip
SATA: SoC controller for 2 SATA3 (6 Gbps) ports Marvel 88SE9230 controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,10
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s)
Network Controllers: Dual LAN with Intel® Ethernet Controller I210-AT
SATA: 6 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 8 USB 2.0 port(s) (2 rear’ 5 via header’ 1 Type A) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 VGA port(s), 1 DP (DisplayPort) port(s), 1 HDMI port(s)
Serial Port: 3 COMPort(s) (1 rear’ 2 header)
DOM: 1 SuperDOM (Disk on Module) port with build power
TPM: 1 TPM Header
Others: 1 COM in RJ45 1 COM in RS232 1 COM in RS485
PCIe: 1 PCIe 2.0 x2 (in x8 slot) 1x Mini-PCIe with mSATA
M.2: M.2 Interface: SATA’ PCIe 2.0 x2 Form Factor: 2280, 2242 Key: M-Key
BIOS Type: AMI UEFI
BIOS Features: Plug and Play (PnP) DMI 2.3 ACPI 5.0 USB Keyboard support UEFI 2.4
Software: SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power Management
Voltage: System level control, Monitors CPU voltages, +5V standby, +5V, +3.3V, +12V, +1.8V
LED: Power LED
Temperature: CPU thermal trip support
FAN: 2x 4-pin fan headers (up to 2 fans) Thermal control tachometer fan connectors System level control PWM fan speed control Low noise fan speed control Fan speed control
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ATX Power connector, ACPI power management, 12V DC or ATX Power Source, 4-pin 12v DC power connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -20°C — 60°C (-4°F — 140°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)
X11SAA
Key Features
- Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 socket
- Intel® Pentium™ Processor N4200 (6W, 4C)
- 1 PCIe 2.0 x2 (in x8), 1 Mini-PCIe (mSATA support) and 2 SATA 3.0
- Dual GbE LAN with Intel® i210-AT
- Intel® Goldmont microarchitecture 14nm System-on-Chip
- 1 M.2 M-key with SATA
- 4 SATA 3.0 (RAID 0, 1, 10)
- 1 HDMI, 1 DP, 1 VGA, Intel HD Graphic 3 independent displays
- 2 USB 3.0 ports (2 rear), 8 USB 2.0 (2 rear, 5 via header(s), 1 Type A)
- 1 SATA DOM, 3 COM, TPM header and Audio Header
| Part Number | Qty | Description |
| MCP-260-00068-0B | 1 | 1U I/O Shield for X11SAA with EMI Gasket in CSE-510/505/504 |