X11DPU-V

Form Factor: Proprietary Ultra
Dimension: 17″ x 16.8″ (43.18cm x 42.67cm)
CPU: 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors Dual Socket Socket P (LGA-3647) supported, CPU TDP supports Up to 205W TDP, Dual UPI up to 10.4 GT/s
Core: Up to 28 cores
Note: BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 24 DIMM slots Up to 6TB 3DSECC LRDIMM, DDR4-2933MT/s’ Up to 6TB 3DSECC RDIMM, DDR4-2933MT/s Up to 6TB Intel® Optane™ DC Persistent Memory in memory mode (Cascade Lake only).
Memory Type: 2933/2666/2400/2133 MT/s ECC DDR4 LRDIMM (3DS), RDIMM (3DS)
DIMM Sizes: LRDIMM: 128GB RDIMM: 128GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors
Chipset: Intel® C621
SATA: Intel® C621 controller for 14 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: ASPEED AST2500 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Support for Intelligent Platform Management Interface v.2.0
Graphics: 1 ASPEED AST2500 BMC port(s)
Network Controllers: Networking options provided via Ultra Riser
SATA: 14 SATA3 (6Gbps) port(s)
USB: 3 USB 3.2 Gen1 port(s) (2 via header’ 1 type A) 2 USB 3.0 port(s) (2 rear)
Video Output: 2 VGA D-Sub Connector port(s)
Serial Port: 1 COMPort(s) (1 rear)
DOM: 2 SuperDOM (Disk on Module) port with build power
TPM: 1 TPM Header & Chip both
PCIe: 1 PCIe 3.0 x32 Right Riser Slot, 1 PCIe 3.0 x8 Right Riser Slot, 1 PCIe 3.0 x40 Ultra Riser Slot
BIOS Type: 32MB AMI SPI Flash ROM
Software: SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, SPM, Intel® Node Manager, SSM, IPMI2.0
System Management Software: SuperDoctor 5, IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, IPMICFG, IPMIView for Linux/Windows, SMCIPMITool, SSM, SUM, SPM
Power Configurations: ACPI Power Management
Voltage: VBAT, Supports system management utility, HT, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V, +1.8V, 8 -fan status, 5+1 Phase-switching voltage regulator
Temperature: Thermal Control for 8 Fan Connectors
FAN: 8x 4-pin fan headers (up to 8 fans) Status monitoring for speed control Pulse Width Modulated (PWM) fan connectors 8x fans with tachometer monitoring
Other Features: RoHS, Node Manager Support, CPU thermal trip support for processor protection, Chassis intrusion detection, SDDC, 4x 8-pin GPU power connectors
Operating Temperature Range: 10°C — 35°C (50°F — 95°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)