X10SLV-Q

MBD-X10SLV-Q: X10SLV-Q
Form Factor: Mini-ITX
Dimensions: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® 4th Generation Core™ i3 series, Intel® 4th Generation Core™ i5 series, Intel® 4th Generation Core™ i7 series, Intel® Celeron®, Intel® Pentium®, Intel® Xeon® processor E3-1200 v3.Single Socket LGA 1150 supported, CPU TDP support Up to 91W
Memory Capacity: Up to 16GB Unbuffered non-ECC SO-DIMM, DDR3-1600MHz, in 2 DIMM slots
Memory Type: 1600MHz non-ECC DDR3 SDRAM 64-bit, 204-pin gold-plated SODIMMs
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.35V, 1.5V
Chipset: Intel® Q87 Express
SATA: Intel® Q87 controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
Network Controllers: Single LAN with Intel® Ethernet Connection I217-VSingle LAN with Intel® Ethernet Controller I210-AT
Audio: ALC 888S HD Audio
Graphics: Intel® HD 4600 Graphics 3 Independent Displays
SATA: 4 SATA3 (6Gbps) port
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 5 USB 2.0 ports (2 rear + 2 headers + 1 Type A)2 USB 3.0 ports (2 rear)
Video Output: 1 DP (DisplayPort) port, 1 HDMI port, 1 DVI — I port,3 Independent Displays
Serial Port / Header: 5 COM Ports (2 rear, 3 headers), 1 RS232/422/485, 4 RS2325 fast UART 16550 serial
TPM: 1 TPM Header
PCI-E: 1 PCI-E 3.0 x16Mini-PCIE with mSATA support
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: SMBIOS 2.7.1ACPI 5.0USB Keyboard support
Software: NMI, SuperDoctor® III, Watchdog
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recovery
Voltage: +1.8V, +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, HT, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature, VBAT
FAN: 3x 4-pin fan headers (up to 3 fans), 3 fans with tachometer monitoring, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Adaptive Thermal Monitor, PECI 3.0
LED: CPU / System Overheat LED, +5V Standby alert LED
Other Features: 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, CPU thermal trip support for processor protection, RoHS, System level control, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)