X10SLQ-L

MBD-X10SLQ-L: X10SLQ-L
Form Factor: uATX
Dimensions: 9.6″ x 9.6″ (24.38cm x 24.38cm)
CPU: Intel® 4th Generation Core™ i3 series, Intel® 4th Generation Core™ i5 series, Intel® 4th Generation Core™ i7 series, Intel® Celeron®, Intel® Pentium®v.Single Socket LGA 1150 supported, CPU TDP support Up to 95W TDP
Memory Capacity: Up to 16GB Unbuffered non-ECC UDIMM, DDR3-1600MHz, in 2 DIMM slots up to 16GB UDIMM non ECC
Memory Type: 1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 1GB, 2GB, 4GB, 8GB
Memory Voltage: 1.35V, 1.5V
Chipset: Intel® Q87 Express
SATA: Intel® Q87 controller for 5 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
Network Controllers: Single LAN with Intel® PHY I217LMSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio: 7.1 HD Audio header and rear I/O
Graphics: Intel® HD 4600 Graphics 3 Independent Displays
SATA: 5 SATA3 (6Gbps) port
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 6 USB 2.0 ports (2 rear + 4 headers)2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port, 1 HDMI port, 1 DVI — D port,3 Independent Displays
Serial Port / Header: 4 COM Ports (4 headers)4 fast UART 16550 serial
TPM: 1 TPM Header
PCI-E: 1 PCI-E 3.0 x16 (in x16 slot)1 PCI-E 2.0 x41 PCI-E 2.0 x1
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: ACPI 5.0USB Keyboard supportDMI (SMBIOS) 2.7
Software: AMT, NMI, SuperDoctor® III, vPro, Watchdog
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recoveryInternal/External modem ring-on
Voltage: +1.8V, +12V, +3.3V, +5V, +5V standby, 4 -fan status, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, Chassis intrusion header, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature
FAN: 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control, Support 3-pin fans (w/o speed control), System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, PECI, Adaptive Thermal Monitor, PECI 3.0
LED: CPU / System Overheat LED, +5V Standby alert LED
Other Features: ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, System level control, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)