X10SLE-HF

MBD-X10SLE-HF: X10SLE-HF
Form Factor: Proprietary
Dimensions: 4.6″ x 11.7″ (11.68cm x 29.72cm)
CPU: Intel® 4th Generation Core™ i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.Single Socket LGA 1150 supported
Memory Capacity: Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots 4x 240-pin DDR3 DIMM sockets
Memory Type: 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.5V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: Intel® C226 Express PCH
SATA: Intel® C226 controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC
Network Controllers: Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC via KVM connector
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 ports (2 rear Type A))1 USB 3.1 Gen1 ports, 1 Type A)’ USB 2.0 via KVM connector
Video Output: 1 VGA port,via KVM connector
Serial Port / Header: 1 COM Port (1 rear), via KVM connector1 fast UART 16550 serial
TPM: 1 TPM Header
Others: 1 KVM Connector for 2 USB 2.0, VGA and COM Ports
PCI-E: 1 PCI-E 3.0 x8 (Micro Low Profile)for Dual GbE, 10GbE or IB AOC
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: DMI (SMBIOS) 2.7ACPI 5.0USB Keyboard support
Software: IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® III, Watchdog
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recovery
Voltage: +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, Chipset Voltage, HT, Memory, Memory Voltages, System level control, System temperature, VBAT
FAN: Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, +5V Standby alert LED
Other Features: Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% — 95% (non-condensing)