X10SLE-DF

MBD-X10SLE-DF: X10SLE-DF
Form Factor: Proprietary
Dimensions: 4.6″ x 18.5″ (11.68cm x 46.99cm)
CPU: Intel® 4th Generation Core™ i3 series, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.Single Socket LGA 1150 supported 8th Gen Intel® Core™ desktop processors are supported with Intel® 300 Series chipset motherboards only
Memory Capacity: Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots Up to 32GB ECC VLP-UDIMM DDR3-1600MHz per node
Memory Type: 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.35V, 1.5V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: Intel® C224 Express PCH
SATA: Intel® C224 controller for 2 SATA3 (6 Gbps) ports’ RAID 0,1
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC
Network Controllers: Dual LAN with Intel® i350 Gigabit Ethernet ControllerSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)Shared with 2 Nodes
Graphics: Aspeed AST2400 BMC via KVM connector
LAN: 2 RJ45 Gigabit Ethernet LAN ports1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 via KVM connector
Video Output: 1 VGA port,via KVM connector
Serial Port / Header: 1 COM Port (1 rear), via KVM connector
Others: KVM connector for 2 USB 2.0, VGA and COM Ports
PCI-E: N/A
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: DMI (SMBIOS) 2.7ACPI 5.0USB Keyboard support
Software: IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® III, Watchdog
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recovery
Voltage: +12V, +3.3V, +5V, +5V standby, 3+1 Phase-switching voltage regulator, 3.3V standby, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT
FAN: Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, UID/Remote UID
Other Features: ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, RoHS, UID, WOL
Operating Temperature Range: 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% — 95% (non-condensing)