X10SDV-TLN4F

MBD-X10SDV-TLN4F: X10SDV-TLN4F
Form Factor: Mini-ITX
Dimensions: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® Xeon® Processor D-1541.Single Socket FCBGA1667 supported, CPU TDP support 45W
Cores / Cache: 8 cores, 16 threads / 12MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2400MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 6 SATA3 (6 Gbps) ports’ RAID 0,1,5,10
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC
Network Controllers: Dual LAN with Intel® Ethernet Controller I350-AM2Dual 10GbE Dual LAN with SoCSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)Single LAN with Single LAN with
Graphics: Aspeed AST2400 BMC
SATA: 6 SATA3 (6Gbps) port
LAN: 2 RJ45 Gigabit Ethernet LAN ports2 RJ45 10GBase-T ports1 RJ45 Dedicated IPMI LAN port
USB: 4 USB 2.0 ports (4 headers,Type A))2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: TPM Header
PCI-E: 1 PCI-E 3.0 x16
M.2: 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportHardware BIOS Virus protectionSMBIOS 2.8RTC (Real Time Clock) WakeupUEFI 2.4RTC (Real Time Clock) Wakeup
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power ManagementCPU Fan auto-off in sleep modePower-on mode for AC power recovery
Voltage: +1.8V, +12V, +3.3V, +5V, 4 fans with tachometer monitoring, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature
FAN: 4x 4-pin fan headers (up to 4 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, BMC/IPMI Heartbeat LED
Other Features: 12V DC or ATX Power Source, 4-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)