X10SDV-7TP4F

MBD-X10SDV-7TP4F: X10SDV-7TP4F
Form Factor: Flex ATX
Dimensions: 9.0″ x 7.25″ (22.86cm x 18.42cm)
CPU: Intel® Xeon® Processor D-1537.Single Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache: 8 cores, 16 threads / 12MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2133MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10 RSTeBroadcom®2116 SWcontroller for 16 SATA3 (6 Gbps) ports’SAS2 and SATA3
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC
Network Controllers: Dual LAN with 10G SFP+ from D-1500 SoCDual LAN with 1GbE with Intel® I210Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC
SATA: 4 SATA3 (6Gbps) port
LAN: 2 10G SFP+ LAN ports2 1GbE LAN ports1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 2.0 ports (4 headers, 1 Type A)2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: 1 TPM Header
PCI-E: 2 PCI-E 3.0 x8M.2 PCI-E 3.0×4, M Key 2242/2280/22110, Mini-PCI-E with mSATA support
M.2: 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportHardware BIOS Virus protectionRTC (Real Time Clock) WakeupSMBIOS 2.8UEFI 2.4
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power ManagementATX Power connector+12V DC Power InputControl of power-on for recovery from AC power lossCPU thermal trip support for processor protectionM.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
Voltage: +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), Chassis intrusion header, HT, Memory, Memory Voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature, VBAT
FAN: 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED
Other Features: 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)