X10SDV-4C-7TP4F

MBD-X10SDV-4C-7TP4F: X10SDV-4C-7TP4F
Form Factor: Flex ATX
Dimensions: 9.0″ x 7,25″ (22.86cm x 17.78cm)
CPU: Intel® Xeon® Processor D-1518. Socket FCBGA1667 supported, CPU TDP support 35W
Cores / Cache: 4 cores, 8 threads / 6MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2133MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10 Broadcom 2116 SW controller for 16 SATA3 (6Gbps) ports’ SAS2 and SATA3
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Dual LAN with 10G SFP+ from D-1500 SoCDual LAN with 1GbE with Intel® I210
Graphics: Aspeed AST2400 BMC
SATA: 4 SATA3 (6Gbps) port
LAN: 2 10G SFP+ LAN ports2 1GbE LAN ports1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 2.0 ports (4 headers, 1 Type A)2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: TPM Header
PCI-E: 2 PCI-E 3.0 x8Interface: PCI-E 2.0 x1 Mini-PCI-E with mSATA support
M.2: M.2 Interface: 1 SATA/PCI-E 3.0 x4Form Factor: 2242, 2280, 22110Key: M-Key
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportRTC (Real Time Clock) WakeupSMBIOS 2.8UEFI 2.4
Software: Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power Management+12V DC Power InputControl of power-on for recovery from AC power lossCPU thermal trip support for processor protectionM.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOLATX Power connector
Voltage: +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, System level control, VBAT
FAN: 6x 4-pin fan headers (up to 6 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED
Other Features: 12V DC or ATX Power Source, Chassis intrusion detection, Chassis intrusion header, RoHS
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)