X10SDV-2C-TP8F

MBD-X10SDV-2C-TP8F: X10SDV-2C-TP8F
Form Factor: Flex ATX
Dimensions: 9.0″ x 7.25″ (22.86cm x 18.42cm)
CPU: Intel® Pentium® Processor D1508.Single Socket FCBGA1667 supported, CPU TDP support 25W
Cores / Cache: 2 cores, 4 threads / 3MB cache
Memory Capacity: Up to 128GB Registered ECC RDIMM, DDR4-2133MHzUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 4 SATA3 (6 Gbps) ports’ RAID 0,1,5,10 RSTe
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Dual LAN with 10G SFP+ from D-1500 SoCQuad LAN with 1GbE with Inte® I350-AM4Dual LAN with 1GbE with Intel® I210Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC
SATA: 4 SATA3 (6Gbps) port
LAN: 1 RJ45 Dedicated IPMI LAN port6 1GbE LAN ports2 10G SFP+ LAN ports
USB: 5 USB 2.0 ports (4 headers, 1 Type A)2 USB 3.0 ports (2 rear)
Video Output: 1 VGA port
Serial Port / Header: 1 COM Port (1 header)
TPM: TPM Header
PCI-E: 2 PCI-E 3.0 x8Mini-PCI-E with mSATA support
M.2: 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
BIOS Type: 128Mb SPI Flash with AMI BIOS
BIOS Features: PCI 3.0ACPI 5.0USB Keyboard supportHardware BIOS Virus protectionSMBIOS 2.8UEFI 2.4RTC (Real Time Clock) Wakeup
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power ManagementATX Power connector+12V DC Power InputControl of power-on for recovery from AC power lossCPU thermal trip support for processor protectionM.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
Voltage: +1.8V, +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, HT, Memory, Memory Voltages, Supports system management utility, System level control, System temperature, VBAT
FAN: 6x 4-pin fan headers (up to 6 fans), Dual Cooling Zone, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Quad Cooling Zone, Status monitoring for on/off control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, UID/Remote UID
Other Features: 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)