X10SDD-F

MBD-X10SDD-F: X10SDD-F
Form Factor: Proprietary
Dimensions: 4.75″ x 19.95″ (12.07cm x 50.67cm)
CPU: Intel® Xeon® Processor D-1541.Single Socket FCBGA1667 supported, CPU TDP support 45W
Memory Capacity: 128GB Registered ECC RDIMMUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/2400MHz ECC DDR4 RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: 2 SATA3 (6 Gbps) ports’
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Intel® i350, 2x Gigabit LAN ports
Graphics: Aspeed AST2400 BMC
USB: 2 USB 2.0 ports (2 rear Type A))1 USB 3.1 Gen1 ports, 1 Type A)’ 2x USB 2.0 ports via KVM
Video Output: 1 VGA port
TPM: 1 TPM Header
PCI-E: 1 PCI-E 3.0 x8 (Micro Low Profile),1 PCI-E 3.0 x8
M.2: 2 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: ACPI 5.0PCI FW 3.0Plug and Play (PnP)UEFI 2.4SMBIOS 2.8USB Keyboard support
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® 5, Watchdog
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recovery
Voltage: +12V, +3.3V, +5V, +5V standby, 1.2V (VDIMM), 3.3V standby, Memory, Memory Voltages, Monitors CPU voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature
FAN: 1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors
Temperature: N/A
LED: N/A
Other Features: ACPI power management, CPU thermal trip support for processor protection, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range: -20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range: 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)