X10SDD-16C-F

MBD-X10SDD-16C-F: X10SDD-16C-F
Form Factor: Proprietary
Dimensions: 4.75″ x 19.95″ (12.07cm x 50.67cm)
CPU: Intel® Xeon® Processor D-1581.Single Socket FCBGA1667 supported, CPU TDP support 65W
Cores / Cache: / 24MB cache
Memory Capacity: 128GB Registered ECC RDIMMUp to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots
Memory Type: 2133/2400MHz ECC DDR4 RDIMM and ECC/Non-ECC UDIMM
DIMM Sizes: 4GB, 8GB, 16GB, 32GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: 2 SATA3 (6 Gbps) ports’
IPMI: Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Network Controllers: Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
Graphics: Aspeed AST2400 BMC via KVM connector
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 2.0 ports (2 rear Type A))’ 2x USB 2.0 ports via KVM
Video Output: 1 VGA port,via KVM connector
Serial Port / Header: 1 COM Port (1 rear), via KVM connector1 fast UART 16550 serial
TPM: TPM Header
Others: KVM Connector for VGA, 2 USB 2.0 and COM Ports
PCI-E: 1 PCI-E 3.0 x8,1 PCI-E 3.0 x8 (Micro Low Profile)
M.2: 3 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: Plug and Play (PnP)APM 1.2ACPI 1.0 / 2.0 / 3.0 / 4.0USB Keyboard supportRTC (Real Time Clock) WakeupSMBIOS 2.3
Software: Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® III, Watchdog
Power Configurations: ACPI Power ManagementMain Switch Override MechanismPower-on mode for AC power recoveryInternal/External modem ring-on
Voltage: +12V, +3.3V, +5V, +5V standby, 1.2V (VDIMM), 3.3V standby, 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V, HT, Memory, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, System temperature
FAN: Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, System level control, Thermal control tachometer fan connectors
Temperature: N/A
LED: CPU / System Overheat LED, UID/Remote UIDBMC Heartbeat LED, System Failure LED
Other Features: ACPI power management, CPU thermal trip support for processor protection, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL
Operating Temperature Range: 0°C ~ 60°C (32°F ~ 140°F)
Non-Operating Temperature Range: -20°C ~ 60°C (-4°F ~ 140°F)
Operating Relative Humidity Range: 10% ~ 85% (non-condensing)
Non-Operating Relative Humidity Range: 10% ~ 95% (non-condensing)