SuperStorage 6049P-E1CR45H

SSG-6049P-E1CR45H: SuperStorage 6049P-E1CR45H (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,3 UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SAS: SAS3 (12Gbps) via Broadcom 3108′ HW RAID RAID 0, 1, 5, 6, 10, 50, 60
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
Serial ATA: 4 SATA3 (6Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 1 Type A
VGA: 1 VGA D-Sub connector port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header
BIOS Type: AMI UEFI
Software: Intel® Node Manager IPMI 2.0 NMI SSM, SPM, SUM SuperDoctor® 5 Watchdog
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 4U Rackmount
Model: CSE-946LTS-R1K66P1
Width: 17.2″ (437mm)
Height: 7″ (178mm)
Depth: 26″ (660mm)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power status LED Hard drive activity LED Network activity LEDs System Information LED Power fail LED
PCI-Express: 2 PCI-E 3.0 x16 slots 1 PCI-E 3.0 x8 slot 1SIOM card support(must bundle with network card)
Hot-swap: 45 Hot-swap 3.5″ SAS3/SATA3 drive bays 2 Rear Hot-swap 2.5″ SATA drive bays
Optional: 6 NVMe bays (optional)
Fans: 5 Hot-swap 8cm rear exhaust PWM fans
Total Output Power: 1000W: 100 – 127Vac 1600W: 200 – 240Vac
Dimension(W x H x L): 73.5 x 40 x 265 mm
Input: 100-127Vac / 12.9A Max / 50-60Hz 200-240Vac / 9.5A Max / 50-60Hz
+12V: Max: 82A / Min: 0.1A (100-127Vac) Max: 132A / Min: 0.1A (200-240Vac)
12V SB: Max: 2A / Min: 0.2A
Output Type: 25 Pairs Gold Finger Connector
Certification:  Platinum Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)