SuperServer 6029P-WTRT

SYS-6029P-WTRT: SuperServer 6029P-WTRT (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,Dual UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C622 chipset
SATA: SATA3 (6Gbps)’ RAID 0, 1, 5, 10
Network Controllers: Dual 10Gbase-T LAN with Intel C622
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
SATA: 12 SATA3 (6 Gbps) ports
LAN: 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port
USB: 4 USB 3.0 ports (rear)
Video: 1 VGA port
DOM: 2 SuperDOM (Disk on Module) ports
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 2U Rackmount
Model: CSE-826BAC4-R1K23WB
Width: 17.2″ (437mm)
Height: 3.5″ (89mm)
Depth: 25.5″ (648mm)
Gross Weight: 64 lbs (29.0 kg)
Available Colors: Black
Buttons: Power On/Off button UID button
LEDs: Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED
PCI-Express: 1 PCI-E 3.0 x16 (FHHL) slot 2 PCI-E 3.0 x8 (FHHL) slots 2 PCI-E 3.0 x8 (LP) slots 1 PCI-E 3.0 x16 for Add-on-Module (AOM) 1 PCI-E 3.0 x4 NVMe M.2 slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Hot-swap: 12 Hot-swap 3.5″ SAS/SATA drive bays with SES2 and Mini-i-Pass (SFF 8087) connectivity
Fans: 3 High-performance 8cm PWM fans
Total Output Power: 1000W/1200W
Dimension(W x H x L): 76 x 40 x 336 mm
Input: 100-127Vac / 15-12A / 50-60Hz 200-240Vac / 8.5-7A / 50-60Hz 200-240Vdc / 8.5-7A (for CCC only)
+12V: Max: 83A / Min: 0A (100-127Vac) Max: 100A / Min: 0A (200-240Vac) Max: 100A / Min: 0A (200-240Vdc)
+5Vsb: Max: 4A / Min: 0A
Output Type: 19 Pairs Gold Finger Connector
Certification: Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)