SuperServer 6029BT-HNC0R

Key Applications
  — Compute Intensive Application
  — HPC, Data Center, Enterprise
    Server
  — Hyperscale / Hyperconverged

Key Features

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual Socket P (LGA 3647) support
    2nd Gen Intel® Xeon® Scalable
    processors (Cascade Lake/Skylake)

2. 24 DIMMs’ up to 6TB 3DS ECC
    DDR4-2933MHz RDIMM/LRDIMM,
    Supports Intel® Optane™ DCPMM

3. 2 PCI-E 3.0 x16 (LP) slot’ 1 SIOM
    card support (flexible networking)
    Note: must bundle with Network card

4. 3 Hot-swap 3.5″ NVMe/SAS3 drive bays’
    2 M.2 SATA3 or NVMe support

5. SAS3 support via Broadcom 3008′
    IT mode

6. 1 Carrier Card slot (M.2 support)

7. IPMI 2.0 + KVM with dedicated LAN

8. Video via Aspeed AST2500 BMC

9. 4 Heavy duty 8cm PWM fans with
    air shroud

10. 2200W Redundant Power Supplies
    Titanium Level (96%)

SYS-6029BT-HNC0R: SuperServer 6029BT-HNC0R (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,Dual UPI up to 10.4GT/s Support CPU TDP 70-205W*
Cores: Up to 28 Cores
Note: * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization.
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SAS: SAS3 (12Gbps) via Broadcom 3008′ IT mode
Network: Must bundle with at least oneSIOM network card
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
Video: 1 VGA port
DOM: 1 SuperDOM (Disk on Module) port
Others: M.2 and SATA DOM for boot drive only
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 2U Rackmount
Model: CSE-827BHQ+-R2K22BP
Width: 17.6″ (447mm)
Height: 3.47″ (88mm)
Depth: 30.11″ (765mm)
Package: 9.76″ (H) x 24.65″ (W) x 45.28″ (D)
Weight: Gross Weight: 86.5 lbs (39.24 kg) Net Weight: 56 lbs (25.4 kg)
Available Colors: Black
Buttons: Power On/Off button UID button
LEDs: Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED
PCI-Express: 2 PCI-E 3.0 (x16) Low-profile slots 1SIOM card support(must bundle with network card)
Hot-swap: 3 Hot-swap 3.5″ NVMe/SAS3 drive baysPlease contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
M.2: 2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B
Fans: 4 Heavy duty 8cm PWM fans with air shroud
Total Output Power: 1200W/1800W/1980W/2090/2200W
Dimension(W x H x L): 45 x 40 x 480 mm
Input: 1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V: Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: Gold Finger
Certification:   Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)

Part Number Qty Description
FAN-0191L4 - 80x80x38 mm, 14.9K RPM, Non-hot-swappable Middle Cooling Fan (Optimal for computational performance)
MCP-220-00140-0B - Black gen 8 hot-swap 3.5-to-2.5 Tool-less HDD tray, orange tab

AOM-TPM-9670H-S

1 SPI Capable TPM 2.0 Provisioned for Server, Horizontal Form Factor

AOM-TPM-9671H-S

1 SPI Capable TPM 1.2 Provisioned for Server, Horizontal Form Factor

AOC-VROCINTMOD


AOC-VROCSTNMOD


AOC-VROCPREMOD

1
1
1
Intel VROC, RAID 0, 1, 5, 10 (Intel SSD Only)
Intel VROC Standard, RAID 0, 1, 10
Intel VROC Premium, RAID 0, 1, 5, 10

OS4HR3/2/1


OSNBD3/2/1

-
-
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service

SFT-OOB-LIC

1 OOB Management Package (per node license)

SFT-DCMS-Single

1 DataCenter Management Package (per node license)
- - Supermicro SATA DOM Solutions [

Details

]
AOC-S40G-i2Q
AOC-SGP-i2
AOC-SGP-i4
AOC-STG-b4S
AOC-STGN-i2S
AOC-STGN-i1S
AOC-STG-i2T
AOC-STG-i2
-
-
-
-
-
-
-
-
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB

AOC-SMG3-2H8M2-B


AOC-SMG2-2TM2

-
-
2x Hybrid NVMe/SATA M.2 carrier for BigTwin,HF,RoHS
2x SATA M.2 RAID 1 adapter for BigTwin,HF,RoHS

Форма заявки