SuperServer 6019U-TR25M

SYS-6019U-TR25M: SuperServer 6019U-TR25M (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,Dual UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM 2666 ECC DDR4 NVDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SATA: SATA3 (6Gbps)’ RAID 0, 1, 5, 10
Network Connectivity: 2 25GbE SFP28 ports via AOC-URN4-M2TS-O (Mellanox ConnectX-4 Lx EN)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
SATA: 4 SATA3 (6Gbps) ports
LAN: 2 25GbE SFP28 ports 1 RJ45 Dedicated IPMI LAN port
USB: 3 USB 3.0 ports (2 rear, 1 Type A)
Video: 2 VGA ports (1 rear, 1 onboard)
Serial Port: 1 Serial header
DOM: 2 SATA DOM (Disk on Module) support with embedded power
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5
Power Configurations: ACPI Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-819UTS-R751P-T
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 29.7″ (754mm)
Weight: Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 kg)
Available Color: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED / UID LED
PCI-Express: 2 PCI-E 3.0 x16 (Full-height, 10.5″ L) 1 PCI-E 3.0 x8 (Low-profile) 1 PCI-E 3.0 x16 (internal Low-profile) (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Hot-swap: 4 Hot-swap 3.5″ drive bays 4 SATA3 (optional SAS3 via AOC)
M.2: 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list) 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2
Fans: 8 Heavy duty fans with optimal fan speed control
Air Shroud: 1 Air Shroud
AC Input: 100-127Vac, 50-60Hz 200-240Vac, 50-60Hz
+12V: Max: 62.5A & Min: 0A (100Vac-127Vac) Max: 62.5A & Min: 0A (200Vac-240Vac)
12V SB: Max: 2.1A Min: 0A
Certification:  Platinum Level    [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)