SuperServer 5019S-WR

SYS-5019S-WR: SuperServer 5019S-WR (Black)
CPU: Single Socket H4 (LGA 1151) supports:Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processorsCPU TDP up to 80W
Note: BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors
Memory Capacity: 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4ECC UDIMM
Memory Type: 2400/2133/1866/1600MHzECC DDR4 SDRAM 72-bit,288-pin(UDIMM) gold-plated DIMMs
DIMM Sizes: 16GB, 8GB, 4GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: Intel® C236 chipset
SATA: SATA3 (6Gbps) via C236 controller RAID 0, 1, 5, 10 support
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers: Dual Intel® I210-AT Gigabit Ethernet LAN ports Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video: ASPEED AST2400 BMC
SATA: 6 SATA3 (6Gbps) ports
LAN: 2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 6 USB 2.0 ports (2 rear + 4 headers)
Video: 1 VGA port
Serial Port / Header: 2 COM ports (1 rear, 1 header)
SuperDOM: 2 SuperDOM (Disk on Module) ports with built-in power
Voltage: Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN: Total of 6 fan headers supporting up to 6 fans3 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED: System Information LED Suspend static indicator LED UID/Remote UID
Other Features: Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free
Form Factor: 1U Rackmount
Model: CSE-815TQC-R504WB
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 25.6″ (650mm)
Package: 23.5″ (W) x 8.5″ (H) x 33.7″ (L)
Weight: Net Weight: 24 lbs (10.9 kg) Gross Weight: 35 lbs (15.9 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Information LED Information LED (temp., status)
PCI-E: 1 PCI-E 3.0 x16 or 2x PCI-E x8 slots 1 PCI-E 3.0 x4 (in x16 slot)
M.2: 1x M.2 Interface: PCI-E 3.0 x4 and SATA Form Factor: 2260, 2280, 22110 Key: M-Key Double Height Connector
Hot-swap: 4 Hot-swap 3.5″ SATA3 drive bays
Fans: 4x 40x56mm counter-rotation fansOptional 2x 40x56mm counter-rotation fans
With Power Distributor: +5V: 25 Amp +3.3V: 12 Amp -12V: 0.6 Amp
Certification:     Platinum Certified  [ Test Report ]
BIOS Type: 8MB SPI Flash EEPROM with AMI BIOS
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C to 35°C (50°F to 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)