SuperServer 5019P-WTR

SYS-5019P-WTR: SuperServer 5019P-WTR (Black)
CPU: Single Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors Support CPU TDP 70-205W*
Cores: Up to 28 Cores
Note: *Certain high frequency optimized CPU are not supported, such as Intel Gold 6250 and 6256. Please contact Supermicro Technical Support for additional information.
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Memory Capacity: 6 DIMM slots Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C622 chipset
SATA: SATA3 (6Gbps)’ RAID 0, 1, 5, 10
Network Controllers: Dual 10GBase-T LAN with Intel® X722 + X557
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
SATA: 10 SATA3 (6Gbps) ports
LAN: 2 RJ45 10GBase-T LAN ports 1 RJ45 dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 7 USB 2.0 ports (2 rear + 5 headers)
Video: 1 VGA port
Serial Port / Header: 2 COM ports (1 rear, 1 header)
SuperDOM: 2 SuperDOM (Disk on Module) ports with built-in power
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-815TQC-R504WB2
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 25.6″ (650mm)
Package: 23.5″ (W) x 8.5″ (H) x 33.7″ (L)
Weight: Gross Weight: 48 lbs (21.77 kg) Net Weight: 24 lbs (10.89 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Information LED Information LED (temp., status)
PCI-Express: 2 PCI-E 3.0 x16 (FHFL) slots 1 PCI-E 3.0 x8 (LP) slot
M.2: 1x M.2 Interface: PCI-E 3.0 x4 and SATA Form Factor: 2280, 22110 Key: M-Key Double Height Connector
Hot-swap: 4 Hot-swap 3.5″ SATA3 drive bays
Fans: 5 Counter-rotation 40x56mm PWM fans 1 fan for AOC cooling (option)
Total Output Power: 500W: 100 – 240Vac
Dimension(W x H x L): 54.5 x 40.25 x 320 mm
Input: 100-240Vac, 50-60Hz, 6.1-2.6A
+12V: Max: 42A / Min: 0.5A
+5Vsb: Max: 4A / Min: 0A
Output Type: Gold Finger Connector Mating with Molex 45984-4343
With Power Distributor: +5V: 25A +3.3V: 12A -12V: 0.6A
Certification:   Platinum Certified  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)