SuperServer 5019P-M

SYS-5019P-M: SuperServer 5019P-M (Black)
CPU: Single Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors Support CPU TDP 70-165W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
Memory Capacity: 6 DIMM slots Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Chipset: Intel® C621 chipset
SATA: SATA3 (6Gbps) via C621 controller RAID 0, 1, 5, 10 support
Network Controllers: Dual Gigabit Ethernet LAN with Marvell® 88E1512
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
SATA: 12 SATA3 (6Gbps) ports
LAN: 2 RJ45 1GbE LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) 6 USB 2.0 ports (2 rear + 4 headers)
Video: 1 VGA port
Serial Port / Header: 2 COM ports (1 rear, 1 header)
SuperDOM: 2 SuperDOM (Disk on Module) ports with built-in power
BIOS Type: AMI UEFI
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-813MFTQC-350CB2
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 19.85″ (503mm)
Package: 8.5″ (H) x 24″ (W) x 29.5″ (D)
Weight: Gross Weight: 30.4 lbs (13.8 kg) Net Weight: 17.6 lbs (8 kg)
Available Colors: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Information LED
PCI-Express: 1 PCI-E 3.0 x16 slot (FH, HL)
M.2: 1x M.2 Interface: PCI-E 3.0 x4 Form Factor: 2242, 2280 Key: M-Key Double Height Connector
Hot-swap: 4 Hot-swap 3.5″ SATA3 drive bays
Optional: Optional slim optical device bay, optional FDD/USB bay
Fans: 4x 40x28mm PWM fans Optional 2 fans for AOC cooling
AC Voltage: 100-240 V, 50-60 Hz, 5.0-2.5 Amp
+5V: Max.: 15 Amp Min.: 0.2 Amp
+5V standby: Max.: 3 Amp Min.: 0 Amp
+12V: Max.: 29 Amp Min.: 0.5 Amp
-12V: Max.: 0.2 Amp Min.: 0 Amp
+3.3V: Max.: 12 Amp Min.: 0.2 Amp
Certification:     Platinum Level Certified  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)