SuperServer 1029U-TN12RV

SYS-1029U-TN12RV: SuperServer 1029U-TN12RV (Black)
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,Dual UPI up to 10.4GT/s Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
Memory Capacity: 24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM 2666 ECC DDR4 NVDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SATA: SATA3 (6Gbps)
Network Connectivity: Networking options provided via Ultra Riser card
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
NVMe: 6 NVMe/SATA ports (NVMe from CPU 1) 6 NVMe/SATA ports (NVMe from CPU 2)
LAN: Networking options provided via Ultra Riser card 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 1 USB 3.0 (front)
Video: 1 VGA port
Serial Port: 1 Serial header
DOM: 2 SuperDOM (Disk on Module) ports
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager Redfish API IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5
Power Configurations: ACPI Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-119UHTS-R1K22HP-T
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 29.1″ (739mm)
Gross Weight: 48 lbs (21.8 kg)
Available Color: Black
Buttons: Power On/Off button System UID button
LEDs: Power LED Hard drive activity LED Network activity LEDs UID LED
PCI-Express: 1 PCI-E 3.0 x16 (FH, 10.5″L) 1 PCI-E 3.0 x8 (LP) 1 Internal PCI-E 3.0 (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
Hot-swap: 12 Hot-swap 2.5″ NVMe/SATA drive bays Optional SAS support via SAS storage controller
M.2: 2 M.2 PCI-E 3.0 x4 M-Key NVMe via optional add-on card AOC-SLG3-2M2 (2260/2280/22110)
Fans: 8 Heavy duty fans with optimal fan speed control
Air Shroud: 1 Air Shroud
Total Output Power: 800W: 100 – 127Vac 1200W: 200 – 240Vac 1200W: 200 -240Vdc (for CCC only)
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 9.8 — 7A / 50-60Hz 200-240Vac / 7.5 — 6A / 50-60Hz 200-240Vdc / 7.5 — 6A (for CCC only)
+12V: Max: 66.7A / Min: 0A (100-127Vac) Max: 100A / Min: 0A (200-240Vac) Max: 100A / Min: 0A (200-240Vdc)
+12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification:   Titanium Level    [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)