SuperServer 1029GQ-TRT

SYS-1029GQ-TRT: SuperServer 1029GQ-TRT
CPU: Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ,3 UPI up to 10.4GT/s Support CPU TDP up to 165W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
Supported GPUs: 4 Double-Width/Single-Width PCI-E 3.0 x16 Card (Full Height Full Length) NVIDIA V100, M10, T4, Quadro RTX, A100 Supports both active and passive cooled GPUs Compatible GPU list
CPU-GPU Interconnect: PCI-E Gen 4 x16 Direct Connect CPU-GPU Dual-Root
Memory Capacity: 12 DIMM slots Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity: Intel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500 BMC
SATA: 4 SATA3 (6Gbps) ports
LAN: 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
Video: 1 VGA port
Serial Header: 1 Fast UART 16550 header
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-118GQETS-R2K05P2
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 35.2″ (894mm) 39.3″ (997mm) with rails
Package: 24″ (H) x 8″ (W) x 46″ (D)
Weight: Net Weight: 45 lbs (20.4 kg) Gross Weight: 58 lbs (26.31 kg)
Available Color: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED / UID LED
PCI-Express: 4 PCI-E 3.0 x16 (FHFL) slots — supporting up to 4 GPUs 2 PCI-E 3.0 x16 (LP) slots
Hot-swap: 2 Hot-swap 2.5″ SAS/SATA drive bays
Fixed: 2 Internal 2.5″ SATA drive bays
M.2: Support 1x M.2 2242/2260/2280 Support M.2 SATA and NVMe
Fans: 9 Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
Total Output Power: 1000W: 100 – 120Vac 1800W: 200 – 220Vac 1980W: 220 – 230Vac 2000W: 230 – 240Vac 2000W: 200 – 240Vac (UL/CUL only)
Dimension(W x H x L): 73.5 x 40 x 265 mm
Input: 100-120Vac / 12.5-9.5A / 50-60Hz 200-220Vac / 10-9.5A / 50-60Hz 220-230Vac / 10-9.8A / 50-60Hz 230-240Vac / 10-9.8A / 50-60Hz 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
+12V: Max: 83.3A / Min: 0A (100-120Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 166.7A / Min: 0A (230-240Vac) Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification:   Titanium Level  [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature:    10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature:   -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity:   8% to 90% (non-condensing) Non-operating Relative Humidity:   5% to 95% (non-condensing)