MBD-H12DST-B: H12DST-B (for server SKUs only)
Form Factor: Proprietary BigTwin™
Dimensions: 6.8″ x 18.86″
CPU: Dual AMD EPYC™ 7003/7002 Series Processors (7003 Series Processor drop-in support requires BIOS version 2.0 or newer) Socket SP3
Cores: Up to 64 Cores
Chipset: System on Chip
Memory Capacity: 16 DIMM slots Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
IPMI: Support for Intelligent Platform Management Interface v. 2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: 1 PCI-E 4.0 x16 SIOM LAN Networking Slot 1 Realtek RTL8211F PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC
SATA: 6 SATA3 (6 Gbps) ports
LAN: Provided via SIOM 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (2 rear) 1 USB 2.0 port (Type A)
VGA: 1 VGA port
Others: 1 COM port (header) 1 SuperDOM power connector 1 TPM 1.2/2.0 header
PCI-Express: 1 PCI-E 4.0 x16 Left Riser Slot 1 PCI-E 4.0 x16 Right Riser Slot 1 PCI-E 4.0 x24 Proprietary Slot(for Supermicro storage add-on card) 1 PCI-E 4.0 x16 SIOM LAN Networking Slot
M.2: Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 22110, 2280 Key: M-key
2U: SC217BHQ+-R2K22BP
Model(s): AS -2124BT-HNTR AS -2124BT-HTR
BIOS Type: AMI 256Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.5V, +1.8V, +12V, +5V, +5V standby CPU switching voltage regulator
FAN: Up to 2 fan status tachometer monitoringUp to 2 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
