MBD-H11SSW-NT: H11SSW-NT
MBD-H11SSW-NT-B: H11SSW-NT (Bulk Pack)
Form Factor: Proprietary
Dimensions: 13.4″ x 12.29″ (34cm x 31.2cm)
CPU: Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3
Cores: Up to 32 Cores Up to 64 Cores (Board revision 2.x required)
Chipset: System on Chip
Memory Capacity: 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: 2x 10GBase-T LAN Ports via Broadcom BCM57416 1 Realtek RTL8211E PHY (dedicated IPMI)
VGA: ASPEED AST2500 BMC
SATA: 2 SATA3 (6 Gbps) ports
SATA/NVMe Hybrid: 16 SATA3 / 4 NVMe
NVMe: 12 NVMe
LAN: 2 RJ45 10GBase-T Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 7 USB 3.0 ports(4 rear + 2 front + 1 Type A)
VGA: 1 VGA port
Others: 2 COM ports (rear) 2 SATA DOM power connectors1 TPM 2.0 header 1 TPM 1.2 header
PCI-Express: 1 PCI-E 3.0 x32 Left Riser Slot 1 PCI-E 3.0 x16 Right Riser Slot
M.2: Interface: 2 PCI-E 3.0 x2 Form factor: 2280, 22110 Key: M-key
2U: SC213BAC8-R1K23WB
Model(s): AS -1113S-WN10RT AS -2113S-WN24RT AS -2113S-WTRT
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby CPU switching voltage regulator Supports system management utility VBAT
FAN: Up to 6-fan status tachometer monitoringUp to 6 4-pin fan headersDual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header UID
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
