MBD-H11DSU-iN: H11DSU-iN
Form Factor: Proprietary Ultra/WIO
Dimensions: 17″ x 17″ (43.2cm x 43.2cm)
CPU: Dual AMD EPYC™ 7001/7002* series Processors (*Board revision 2.x required) Socket SP3
Cores: Up to 32 Cores Up to 64 Cores (Board revision 2.x required)
Chipset: System on Chip
Memory Capacity: 32 DIMM sockets Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: Provided via Ultra Riser Card
VGA: ASPEED AST2500 BMC
SATA: 14 SATA3 (6 Gbps) ports
LAN: 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A)
VGA: 1 VGA port
Others: 1 COM port (rear) 2 SATA DOM power connector 4 NVMe TPM 2.0 header
PCI-Express: WIO: 1 PCI-E 3.0 x32 Left Riser Slot 1 PCI-E 3.0 x16 Right Riser Slot Ultra: 1 PCI-E 3.0 x40 Far Right Riser Slot
Model(s): AS -1023US-TR4AS -1123US-TN10RTAS -1123US-TR4AS -2023US-TR4AS -2123US-TN24R25M
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Software: Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations: ACPI Power Management Power-on mode control for AC power loss recovery
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby VBAT CPU switching voltage regulator
FAN: Up to 8-fan status tachometer monitoringUp to eight 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
Environmental Specifications: Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)