A2SDi-12C-HLN4F

Form Factor: Mini-ITX
Dimension: 6.7″ x 6.7″ (17.02cm x 17.02cm)
CPU: Intel® Atom® Processor C3858 Single Socket FCBGA-1310 supported, CPU TDP supports Up to 25W TDP
Core: Up to 12 cores, 12 threads / 12MB Cache
Note:
Memory Capacity: 4 DIMM slots Up to 256GB ECC RDIMM, DDR4-2400MT/s’ Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2400MT/s
Memory Type: 2400/2133/1866/1600 MT/s ECC/non-ECC DDR4 RDIMM Unbuffered
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: SoC controller for 12 SATA3 (6 Gbps) ports
IPMI: ASPEED AST2400 BMC
Graphics: 1 ASPEED AST2400 BMC port(s)
Network Controllers: Quad LAN with Intel® C3000 SoC, 1GbE
LAN: 4 RJ45 Gigabit Ethernet LAN ports
USB: 4 USB 2.0 port(s) (2 via header’ 2 rear) 1 USB 3.2 Gen1 port(s) (1 type A)
Video Output: 1 VGA port(s)
Serial Port: 1 COMPort(s) (1 header)
DOM: 1 SuperDOM (Disk on Module) ports
TPM: 1 TPM Header
PCIe: 1 PCIe 3.0 x4
M.2: M.2 Interface: SATA’ PCIe 3.0 x2 Form Factor: 2280, 2242 Key: M-Key
BIOS Type: AMI UEFI
BIOS Features: UEFI 2.4 SMBIOS 2.7.1
Software: SuperDoctor® 5, NMI, KVM with dedicated LAN, IPMI2.0, Watchdog
System Management Software: SuperDoctor 5, IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: Power-on mode for AC power recovery, ATX Power connector, +12V DC Power Input, CPU thermal trip support for processor protection
Voltage: VBAT, System temperature, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 4 fans with tachometer monitoring, 4 -fan status, 3.3V standby, 1.2V (VDIMM), 1.05 (PCH), +5V standby, +5V, +3.3V, +12V
LED: UID/Remote UID
Temperature: CPU thermal trip support
FAN: 4x 4-pin fan headers (up to 4 fans) Thermal control tachometer fan connectors, System level control, Fan speed control, Dual Cooling Zone, 4 fans with tachometer monitoring, Status monitoring for speed control, Pulse Width Modulated (PWM) fan connectors, Support 3-pin fans (w/o speed control)
Other Features: WOL, UID, System level control, RoHS, M.2 NGFF connector, Dual Cooling Zones, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, 12V DC or ATX Power Source, SDDC, Intel® QuickAssist Technology, Innovation Engine, 4-pin 12v DC power connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)