A2SAP-L

Form Factor: Pico-ITX
Dimension: 3.9″ x 2.8″ (9.91cm x 7.11cm)
CPU: Intel® Atom®Processor E3930 Single Socket FCBGA-1296 supported, CPU TDP supports Up to 6.5W TDP
Core: Up to 2 cores, 2 threads / 2MB Cache
Memory Capacity: 1 DIMM slots Up to 8GB Unbuffered non-ECC SODIMM, DDR3-1866MT/s
Memory Type: 1866 MT/s non-ECC DDR3 SODIMM UnbufferedDDR3L up to 8GB
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.35V
Chipset: System on Chip
SATA: SoC controller for 1 SATA3 (6 Gbps) ports
Audio: ALC 888S HD Audio
Graphics: 1 Intel® HD Graphics port(s)
Network Controllers: Dual LAN with Intel® Ethernet Controller I210IT
SATA: 1 SATA3 (6Gbps) port(s)
LAN: 2 RJ45 Gigabit Ethernet LAN ports
USB: 2 USB 2.0 port(s) (2 via header) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 HDMI port(s), 1 LVDS port(s)
Serial Port: 2 COMPort(s) (2 header)
Others: 1 8-bit GPIO header 1 EI/O ( DP/HDMI 1 PCI-E 1 1 USB0 1 LPC 1 SMBus 1 2Vsb 2A 1 HD Audio header (Mic-in/Headphone-out) (Note: Audio only support 0C~60C) 1 SMbus/5V SATA Power bo header 1 24-Pin 2V DC-IN power input bo header(20mm pitch) 1 Vsb 28A) (Note:A2SAP-E/-L does NOT support SATA signal)
PCIe: 1 Half size Mini-PCIe (USB2.0 x 1,PCIe Gen2 x 1)1 EI/O (1 DP/HDMI, 2 PCIe x1, 2 USB2.0, LPC, SMBus, 12Vsb 2A, 5Vsb 2.8A) (Note:A2SAP-E/-L does NOT support SATA signal)
M.2: M.2 Interface: USB 2.0′ SATA’ PCIe 2.0 x1 Form Factor: 3042, 2242 Key: B-Key
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.0 SMBIOS 3.0 UEFI 2.6 PCI FW 3.2
Software: SuperDoctor® 5, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: ACPI Power Management, +12V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper
Voltage: VBAT, System temperature, System level control, 3.3V standby, +3.3V, +12V, +1.35V, Memory Voltages, VCGI
LED: Standby alert LED
Temperature: CPU thermal trip support
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management
Operating Temperature Range: -30°C — 60°C (-22°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)