A2SAN-LN4-E

Form Factor: 3.5″ SBC
Dimension: 5.866″ x 4.17″ (14.9cm x 10.6cm)
CPU: Intel® Atom® Processor E3940 Single Socket FCBGA-1296 supported, CPU TDP supports Up to 9.5W TDP
Core: Up to 4 cores, 4 threads / 2MB Cache
Note:
Memory Capacity: 1 DIMM slots Up to 8GB Unbuffered non-ECC SODIMM, DDR3-1866MT/s
Memory Type: 1866 MT/s non-ECC DDR3 SODIMM UnbufferedDDR3L up to 8GB
DIMM Sizes: 2GB, 4GB, 8GB
Memory Voltage: 1.35V
Chipset: System on Chip
SATA: SoC controller for 1 SATA3 (6 Gbps) ports
Graphics: 1 Intel® HD Graphics port(s)
Network Controllers: Quad LAN with Intel® Ethernet Controller I210IT
SATA: 1 SATA3 (6Gbps) port(s)
LAN: 4 RJ45 Gigabit Ethernet LAN ports
USB: 2 USB 2.0 port(s) (2 via header) 2 USB 3.0 port(s) (2 rear)
Video Output: 1 HDMI port(s)
Serial Port: 1 COMPort(s) (1 header)
Others: 1 8-bit GPIO header 1 SMBus header 1 System Fan 1 onboard M2 active LED 1 onboard GbE LAN active LED
PCIe: N/A
M.2: Key: B-Key, E-Key
BIOS Type: AMI UEFI
BIOS Features: ACPI 6.0 SMBIOS 3.0 UEFI 2.5 PCI FW 3.0
Software: SuperDoctor® 5, Watchdog
System Management Software: SuperDoctor 5
Power Configurations: ACPI Power Management, +12V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper
Voltage: VBAT, System temperature, System level control, 3.3V standby, +5V, +3.3V, +12V, +1.35V, VCGI
LED: Standby alert LED
Temperature: CPU thermal trip support
FAN: 1x 4-pinfan header (up to 1 fan) Thermal control tachometer fan connectors System level control PWM fan speed control Low noise fan speed control Fan speed control
Other Features: WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 8-pin 12v DC power connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 85°C (-40°F — 185°F)
Operating Relative Humidity Range: 8% — 90% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)