A1SRM-LN7F-2758

Form Factor: mATX
Dimension: 8″ x 9.6″ (20.32cm x 24.38cm)
CPU: Intel® Atom® Processor C2758 Single Socket FCBGA-1283 supported, CPU TDP supports Up to 20W TDP
Core: Up to 8 cores, 8 threads / 4MB Cache
Memory Capacity: 4 DIMM slots Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR3-1600MT/s
Memory Type: 1600 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 2GB, 4GB, 8GB, 16GB
Memory Voltage: 1.35V 1.5V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: 2 SATA3 (6 Gbps) ports’ RAID 0/1 SoC controller for 4 SATA2 (3 Gbps) ports
IPMI: ASPEED AST2400 BMC
Graphics: 1 ASPEED AST2400 BMC port(s)
Network Controllers: Quad LAN with Intel® C2000 SoC, I354, 2 pairs LAN bypass Single LAN with Intel® Ethernet Controller I210-AT, Management Port with Shared IPMI Dual LAN with Intel® Ethernet Controller I350-AM2, 1 pair LAN bypass
SATA: 2 SATA3 (6Gbps) port(s)4 SATA2 (3Gbps) port(s)
LAN: 7 RJ45 Gigabit Ethernet LAN ports
USB: 7 USB 2.0 port(s) (2 via header’ 1 Type A’ 4 rear)
Video Output: 1 VGA port(s)
Serial Port: 1 fast UART 16550 Serial 2 COMPort(s) (1 header’ 1 rear)
DOM: 1 SATA DOM (Disk on Module) power connector support
TPM: 1 TPM Header
Others: 1 Pair LAN Bypass Ports
PCIe: 1 PCIe 2.0 x4 (in x8 slot)
BIOS Type: AMI UEFI
BIOS Features: ACPI 5.0 USB Keyboard support DMI 2.3 SMBIOS 2.7.1
Software: SuperDoctor® 5, NMI, SUM, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: Power-on mode for AC power recovery, ACPI Power Management, ATX Power connector, +12V DC Power Input, Control of power-on for recovery from AC power loss
Voltage: VBAT, System temperature, System level control, Supports system management utility, Memory, Chassis intrusion header, 3 -fan status, +5V standby, +5V, +3.3V, +12V, Memory Voltages
LED: UID/Remote UID CPU / System Overheat LED
Temperature: CPU thermal trip support Adaptive Thermal Monitor, PECI 3.0
FAN: 3x 4-pin fan headers (up to 3 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, 3 fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication, Support 3-pin fans (w/o speed control)
Other Features: WOL, UID, System level control, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 12V DC or ATX Power Source, Intel® QuickAssist Technology, 4-pin 12v DC power connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 10% — 95% (non-condensing)