A1SRM-LN5F-2358

Form Factor: mATX
Dimension: 8″ x 9.6″ (20.32cm x 24.38cm)
CPU: Intel® Atom® Processor C2358 Single Socket FCBGA-1283 supported, CPU TDP supports Up to 7W TDP
Core: Up to 2 cores, 2 threads / 2MB Cache
Note:
Memory Capacity: 2 DIMM slots 16GB Unbuffered ECC/non-ECC UDIMM, DDR3-1600MT/s
Memory Type: N/A
DIMM Sizes: 2GB, 4GB, 8GB, 16GB
Memory Voltage: 1.35V 1.5V
Error Detection: Corrects single-bit errorsDetects double-bit errors (using ECC memory)
Chipset: System on Chip
SATA: 2 SATA3 (6 Gbps) ports’ RAID 0/1 SoC controller for 2 SATA2 (3 Gbps) ports
IPMI: IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Graphics: 1 ASPEED AST2400 BMC port(s)
Network Controllers: Quad LAN with Intel® C2000 SoC, I354, 2 pairs LAN bypass Single LAN with Intel® Ethernet Controller I210-AT, Management Port with Shared IPMI
SATA: 2 SATA3 (6Gbps) port(s)2 SATA2 (3Gbps) port(s)
LAN: 5 RJ45 Gigabit Ethernet LAN ports
USB: 7 USB 2.0 port(s) (2 via header’ 1 Type A’ 4 rear)
Video Output: 1 VGA port(s)
Serial Port: 2 fast UART 16550 Serial 2 COMPort(s) (1 header’ 1 rear)
DOM: 1 SuperDOM (Disk on Module) port with build power
TPM: 1 TPM Header
Others: 1 Pairs LAN Bypass Ports
PCIe: 1 PCIe 2.0 x4 (in x8 slot)
M.2:
BIOS Type: AMI UEFI
BIOS Features: ACPI 5.0 DMI 2.3 SMBIOS 2.7.1 Plug and Play (PnP)
Software: SuperDoctor® 5, NMI, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
Power Configurations: ACPI Power Management, Control of power-on for recovery from AC power loss
Voltage: System temperature, System level control, Supports system management utility, Memory, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V, +1.8V, Memory Voltages
LED: UID/Remote UID CPU / System Overheat LED
Temperature: Monitoring for CPU and chassis environment CPU thermal trip support Adaptive Thermal Monitor, PECI 3.0
FAN: 3x 4-pin fan headers (up to 3 fans) Thermal control tachometer fan connectors, System level control, PWM fan speed control, Low noise fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features: WOL, UID, System level control, RoHS, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, Chassis intrusion header, Chassis intrusion detection, ATX Power connector, ACPI power management, 12V DC or ATX Power Source, Intel® QuickAssist Technology, 4-pin 12v DC power connector
Operating Temperature Range: 0°C — 60°C (32°F — 140°F)
Non-Operating Temperature Range: -40°C — 70°C (-40°F — 158°F)
Operating Relative Humidity Range: 10% — 85% (non-condensing)
Non Operating Relative Humidity Range: 5% — 95% (non-condensing)