AS -2124US-TNRP: A+ Server 2124US-TNRP
CPU: Dual AMD EPYC™ 7003/7002 Series Processors (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3 Supports CPU TDP up to 280W*
Cores: Up to 64 Cores
Chipset: System on Chip (SoC)
Note: * Certain CPUs with TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 32 DIMM slots Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus
Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Connectivity: Dual-port 10GBase-T and Dual-port 10G SFP+ via Intel® X710-TM4
VGA: ASPEED AST2500 BMC
NVMe: 24 U.2 NVMe support
LAN: Dual 10GBase-T LAN ports Dual 10G SFP+ LAN ports1 RJ45 Dedicated IPMI LAN port
USB: 3 USB 3.0 ports (2 rear + 1 Type A)
VGA: 2 VGA ports (1 rear, 1 onboard)
Others: 1 COM port 2 SATA DOM power connectorsTPM 2.0 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 4-fan status tachometer monitoringUp to four 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 4x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
Form Factor: 2U
Model: CSE-219U2TS-R1K62P3-TN24
Height: 3.5″ (89mm)
Width: 17.2″ (437mm)
Depth: 28.46″ (723mm)
Package: 9.96″ (H) 24.60″ (W) 45.43″ (D)
Weight: Net Weight: 39 lbs (17.7 kg) Gross Weight: 63 lbs (28.6 kg)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
PCI-Express: 1 PCIe 4.0 x16 slot (FH, 9.5″ L)(Both CPUs need to be installed for full access to PCIe slots and onboard controllers. See manual block diagram and AOC Support for details.)
Hot-swap: 24 hot-swap 2.5″ U.2 NVMe drive bays Up to 24 SAS/SATA drives supported via optional SAS kit
Fans: 4 heavy-duty PWM fans with optimal fan speed control
Air Shroud: 1 Air Shroud
Total Output Power: 1600W/1000W
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 13 — 9A / 50-60Hz 200-240Vac / 10 — 8A / 50-60Hz
+12V: Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification: Titanium Level [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 35°C (50°F to 95°F)Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)
A+ Server 2124US-TNRP
— Virtualization
— Cloud Computing
— High-End Enterprise Server
— Hyperconverged Storage
1. Dual AMD EPYC™ 7003/7002 Series Processors
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
2. 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs
3. Expansion slots:
1 PCIe 4.0 x16 slot (FH, 9.5″ L) [Details]
Additional PCIe slots may available if using the 24 SAS Kits solution (Please contact SMC for more information)
4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management
5. Dual-port 10GBase-T and Dual-port 10G SFP+
via Intel® X710-TM4
6. Drive Bays:
24 hot-swap 2.5″ U.2 NVMe drive bays
Up to 24 SATA/SAS drive support via
optional SAS kit
7. 1600W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on configuration and application load)
| Part Number | Qty | Description |
|
AOC-S3008L-L8e &'
2x CBL-SAST-1285-100 (support up to 8 SAS3 HDD) |
- |
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 122HDD, HBA'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-S3008L-L8i &'
2x CBL-SAST-1285-100 (support up to 8 SAS3 HDD) |
- |
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-S3108L-H8iR/16DD &'
2x CBL-SAST-1285-100 (support up to 8 SAS3 HDD) |
- |
Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-SAS3-9361-16I &'
4x CBL-SAST-1285-100 (support up to 16 SAS3 HDD) |
- |
MegaRAID SAS 9361-16i'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-S3616L-L16IT &'
4x CBL-SAST-1285-100 (support up to 16 SAS3 HDD) |
- |
16 int 12Gb/s ports, 16xGen3, IOC/IT mode - LP'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-SAS3-9361-24I &'
6x CBL-SAST-1285-100 (support up to 24 SAS3 HDD) |
- |
MegaRAID SAS 9361-24i'
Slimline x4 (STR) to MiniSAS HD (STR) x4,85CM,100 OHM |
|
AOC-S3808L-L8iT &'
1x CBL-SAST-1264F-100 (support up to 8 SAS3 HDD) |
- |
8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD w/ exp,RoHS'
Slimline x8 (STR) to 2x Slimline x4 (STR),FFC,64/64CM |
|
AOC-S3908L-H8iR-16DD &'
1x CBL-SAST-1264F-100 (support up to 8 SAS3 HDD) |
- |
8 int 12Gb/s ports, x8 Gen4, ROC - LP, 16 HDD w/ exp,RoHS'
Slimline x8 (STR) to 2x Slimline x4 (STR),FFC,64/64CM |
|
AOC-S3816L-L16iT &'
2x CBL-SAST-1264F-100 (support up to 16 SAS3 HDD) |
- |
16 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP, 122 HDD w/ exp,RoHS'
Slimline x8 (STR) to 2x Slimline x4 (STR),FFC,64/64CM |
|
AOC-S3916L-H16iR-32DD &'
2x CBL-SAST-1264F-100 (support up to 16 SAS3 HDD) |
- |
16 int 12Gb/s ports, x8 Gen4, ROC - LP, 32 HDD w/ exp,RoHS'
Slimline x8 (STR) to 2x Slimline x4 (STR),FFC,64/64CM |
| BTR-TFM8G-LSICVM02 | - | CacheVault for Broadcom 3108 |
| MCP-240-00127-0N | Supercap mounting bracket for 2.5" HDD location | |
| BTR-CVPM05 | - | Cache Vault for 3908/3916 controller |
| MCP-240-00127-0N | Supercap mounting bracket for 2.5" HDD location | |
| MCP-290-00128-0N | 1 | 2U Supermicro Cable Management Arm 2nd Gen |
| MCP-290-00127-0N | ||
| AOC-SLG3-2M2 | - | LP, PCIe3 x8, Dual port NVMe M.2 carrier |
| AOC-SLG3-2H8M2 | - | 2x Hybrid NVMe/SATA M.2 RAID Carrier, Standard LP,RoHS |
| SSD-DM128-SMCMVN1 | - | SMC SATADOM, 128GB, SATA 6Gb/s, MLC, uSSD, 15nm,HF,RoHS/REACH |
| SSD-DM480-SMCMVN1 | - | SMC SATADOM,480GB,SATA 6Gb/s,3D TLC,uSSD,HF,RoHS |
| SSD-DM064-SMCMVN1 | - | SMC SATADOM,64GB,SATA 6Gb/s,MLC,uSSD,15nm,HF,RoHS |
| SSD-DM032-SMCMVN1 | - | SMC SATADOM,32GB,SATA 6Gb/s,MLC,uSSD,15nm,HF,RoHS |
| MEM-IDSAVS4-032G | - | SATA3DOM SL 3SE4 32GB SLC LP Pin8 VCC NH (L17725) |
| MEM-IDSAVM8A-128G | - | SATA3DOM SL 3ME3 V2 128GB MLC LP Pin8 VCC NH (S17411) |
| MEM-IDSAVM8A-256G | - | SATA3DOM ML 3ME3 V2 256GB MLC LP Pin8 VCC NH (S17411) |
| MEM-IDSAVE1-064G | - | SATA3DOM SL 3IE3 V2 64GB iSLC LP Pin8 VCC NH (S17411i) |
| MEM-IDSAVS3-032G | - | SATA3DOM SL 3SE 32GB SLC LP No Pin8 Vcc Support (S130710) |
| MEM-IDSAVT1-256G | - | IND SATA3DOM SL 3TE7 256GB 3D TLC Pin8VCC Vertical LP |
| MCP-220-00117-0B | 1~24 | Tool-less black hot-swap 2.5" drive tray (red tab) |
| AOM-TPM-9665H | - | Horizontal TPM using SLB9665 Chipset supporing TPM2.0,RoHS/REACH |
|
OS4HR3/2/1 |
- | 3/2/1-year onsite 24x7x4 service |
|
OSNBD3/2/1 |
- | 3/2/1-year onsite NBD service |
|
SFT-DCMS-Single |
1 | DataCenter Management Package (per node license) |