A+ Server 2124BT-HNTR

Key Features
— Compute Intensive Applications
— HPC, Data Center, Enterprise Server
— Hyperscale / Hyperconverged

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual AMD EPYC™ 7003/7002 Series Processors
(7003 Series Processor drop-in support requires BIOS version 2.0 or newer)

2. Up to 4TB ECC 3DS LRDIMM,
up to DDR4-3200MHz’ 16 DIMM slots

3. 2 PCI-E 4.0 x16 (LP) slot’
1 SIOM card support
(flexible networking)
   Note: must bundle with Network card

4. Integrated IPMI 2.0 + KVM with 
dedicated LAN
• Software Out of Band License key
   (SFT-OOB-LIC) included for
   OOB BIOS management

5. 6 Hot-swap 2.5″ drive bays
(4 NVMe [Gen3] + 2 SATA3, or 6 SATA3)
M.2 Interface: 1 SATA/PCI-E 3.0 x4
   and 1 PCI-E 3.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key

6. Video via Aspeed AST2500 BMC

7. 2200W Redundant Power Supplies
Titanium Level (96%)
   (Full redundancy based on
   configuration and application load)

AS -2124BT-HNTR: A+ Server 2124BT-HNTR (Black)
CPU: Dual AMD EPYC™ 7003/7002 Series Processors (7003 Series Processor drop-in support requires BIOS version 2.0 or newer) Socket SP3 Support CPU TDP / cTDP up to 225W*
Cores: Up to 64 Cores
Note: * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 16 DIMM slots Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
Memory Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
Storage: NVMe SATA3 (6Gbps) via AMD EPYC
Network: 1 PCI-E 4.0 x16 SIOM LAN Networking Slot for flexible networking, seeSIOM LAN options support matrix (Must bundle with at least one SIOM network card)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
LAN: Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
Video: 1 VGA port
DOM: 1 SuperDOM (Disk on Module) port
Others: 1 COM port (header) 1 TPM 2.0 header
BIOS Type: AMI 32Mb SPI Flash ROM
Software: IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
Form Factor: 2U Rackmount
Model: CSE-217BHQ+-R2K22BP
Width: 17.68″ (449mm)
Height: 3.47″ (88mm)
Depth: 28.75″ (730mm)
Package: 24.33″ (618mm) H x 9.57″ (243mm) W x 45.08″ (1145mm) D
Weight: Gross Weight: 85 lbs (38.6 kg) Net Weight: 54.5 lbs (24.7 kg)
Available Colors: Black
Buttons: Power On/Off button UID button
LEDs: Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED
PCI-Express: 2 PCI-E 4.0 (x16) Low-profile slots 1SIOM card support(must bundle with network card)
M.2: Interface: 1 SATA/PCI-E 3.0 x4 and 1 PCI-E 3.0 x4 Form Factor: 2280, 22110 Key: M-key
Hot-swap: 4 Hot-swap 2.5″ NVMe (Gen3)/SATA3 + 2 Hot-swap 2.5″ SATA3 drive baysNote: NVMe Gen4 drives may only operate at Gen3 speed
Fans: 4 Heavy duty 8cm PWM fans
Total Output Power: 1200W/1800W/1980W/2090/2200W
Dimension(W x H x L): 45 x 40 x 480 mm
Input: 1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V: Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: Gold Finger
Certification: Titanium Level [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F) * Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.Non-operating Temperature:-40°C to 60°C (-40°F to 140°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)

Part Number Qty Description
PWS-3K04A-1R - 1U 1400W/2880W/3000W AC/DC PSU with C21 inlet, Titanium, For Bigtwin
PWS-2K60A-1R - 1U 2600W Redundant Titanium PWS, 45(W) X 40(H) X 480(L)

OS4HR3/2/1


OSNBD3/2/1

-
-
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service

SFT-DCMS-Single

1 DataCenter Management Package (per node license)

AOM-TPM-9655V

- TPM 1.2 module with Infineon 9655, RoHS/REACH,PBF'

AOM-TPM-9665V

- TPM 2.0 module with Infineon 9665, RoHS/REACH,PBF'
SSD-DM128-SMCMVN1 - SMC SATADOM, 128GB, SATA 6Gb/s, MLC, uSSD, 15nm,HF,RoHS/REACH
SSD-DM480-SMCMVN1 - SMC SATADOM,480GB,SATA 6Gb/s,3D TLC,uSSD,HF,RoHS
SSD-DM064-SMCMVN1 - SMC SATADOM,64GB,SATA 6Gb/s,MLC,uSSD,15nm,HF,RoHS
SSD-DM032-SMCMVN1 - SMC SATADOM,32GB,SATA 6Gb/s,MLC,uSSD,15nm,HF,RoHS
MEM-IDSAVS4-032G - SATA3DOM SL 3SE4 32GB SLC LP Pin8 VCC NH (L17725)
MEM-IDSAVM8A-128G - SATA3DOM SL 3ME3 V2 128GB MLC LP Pin8 VCC NH (S17411)
MEM-IDSAVM8A-256G - SATA3DOM ML 3ME3 V2 256GB MLC LP Pin8 VCC NH (S17411)
MEM-IDSAVE1-064G - SATA3DOM SL 3IE3 V2 64GB iSLC LP Pin8 VCC NH (S17411i)
MEM-IDSAVS3-032G - SATA3DOM SL 3SE 32GB SLC LP No Pin8 Vcc Support (S130710)
MEM-IDSAVT1-256G - IND SATA3DOM SL 3TE7 256GB 3D TLC Pin8VCC Vertical LP
- - Supermicro SIOM solutions [

Details

]

Форма заявки