A+ Server 2123BT-HNC0R

Key Features
— Compute Intensive Application
— HPC, Data Center, Enterprise
Server
— Hyperscale / Hyperconverged

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)

2. 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors)
4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)

3. 2 PCI-E 3.0 x16 (LP) slot’ 1 SIOM card support (flexible networking)
Note: must bundle with Network card

4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
 key (SFT-OOB-LIC) included
 for OOB BIOS management

5. 6 SAS3, or 4 NVMe + 2 SAS3 Hot-swap 2.5″ drive bays
M.2 Interface: 1 SATA/PCI-E 3.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key

6. SAS3 support via Broadcom 3008′ IT mode

7. Video via Aspeed AST2500 BMC

8. 2200W Redundant Power Supplies
Titanium Level (96%)
(Full redundancy based on configuration and application load)

AS -2123BT-HNC0R: A+ Server 2123BT-HNC0R (Black)
CPU: Dual AMD EPYC™ 7001/7002* series Processors (* Board revision 2.x required) Socket SP3 Supports CPU TDP 200W / cTDP up to 200W**
Cores: Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Note: ** Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
Memory Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 processors)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
Chipset: System on Chip
SAS: SAS3 (12Gbps) via Broadcom 3008′ IT mode
Network: 1 PCI-E 3.0 x16 SIOM LAN Networking Slot for flexible networking, seeSIOM LAN options support matrix (Must bundle with at least one SIOM network card)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
LAN: Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear)
Video: 1 VGA port
DOM: 1 SuperDOM (Disk on Module) port
Others: 1 COM port (header) 1 TPM 2.0 header
BIOS Type: AMI 128Mb SPI Flash ROM
Software: IPMI 2.0 KVM with dedicated LAN SSM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
Form Factor: 2U Rackmount
Model: CSE-217BHQ+-R2K22BP2
Width: 17.68″ (449mm)
Height: 3.47″ (88mm)
Depth: 28.75″ (730mm)
Package: 24.33″ (618mm) H x 9.57″ (243mm) W x 45.08″ (1145mm) D
Weight: Gross Weight: 85 lbs (38.6 kg) Net Weight: 54.5 lbs (24.7 kg)
Available Colors: Black
Buttons: Power On/Off button UID button
LEDs: Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED
PCI-Express: 2 PCI-E 3.0 (x16) Low-profile slots 1SIOM card support(must bundle with network card)
M.2: Interface: 1 SATA/PCI-E 3.0 x4 Form Factor: 2280, 22110 Key: M-key
Hot-swap: 6 Hot-swap 2.5″ SAS3 drive bays or 4 NVMe + 2 SAS3 Hot-swap 2.5″ Note: NVMe Gen4 drives may only operate at Gen3 speed
Fans: 4 Heavy duty 8cm PWM fans
Total Output Power: 1200W/1800W/1980W/2090/2200W
Dimension(W x H x L): 45 x 40 x 480 mm
Input: 1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V: Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb: Max: 2.1A / Min: 0A
Output Type: Gold Finger
Certification: Titanium Level [ Test Report ]
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F) * Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.Non-operating Temperature:-40°C to 60°C (-40°F to 140°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)

Part Number Qty Description

OS4HR3/2/1


OSNBD3/2/1

-
-
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service

SFT-DCMS-Single

1 DataCenter Management Package (per node license)

AOM-TPM-9655V

- TPM 1.2 module with Infineon 9655, RoHS/REACH,PBF'

AOM-TPM-9665V

- TPM 2.0 module with Infineon 9665, RoHS/REACH,PBF'
- - Supermicro SIOM solutions [

Details

]

Форма заявки