A+ Server 2113S-WTRT

AS -2113S-WTRT: A+ Server 2113S-WTRT
CPU: Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W*
Cores: Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset: System on Chip (SoC)
Memory Capacity: 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*(* Board revision 2.x required + 7002 Processors)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: Broadcom BCM57416 Controller
VGA: ASPEED AST2500 BMC
PCI Express: 1 PCI-E 3.0 x16 (FH/HL) slot 2 PCI-E 3.0 x8 (FH/HL) slots 2 PCI-E 3.0 x8 (LP) slots
M.2: Interface: PCI-E 3.0 x2 (NVMe based) Form Factor: 2280, 22110 Key: Onboard M-key Number of M.2: Dual
NVMe: Up to 6 U.2 NVMe support via additional cables
SATA: 16 SATA3 (6 Gbps) ports
LAN: 2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports (4 rear + 1 Type A)
VGA: 1 VGA port
Others: 1 COM port 2 SATA DOM power connectorsTPM 1.2 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Form Factor: 2U
Model: CSE-213AC8-R1K23WB
Height: 3.5″ (89mm)
Width: 17.2″ (437mm)
Depth: 24.8″ (630mm)
Package: 11″ (H) 29″ (W) 38.7″ (D)
Weight: Net Weight: 34 lbs (15.42 kg) Gross Weight: 59 lbs (26.76 kg)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Hot-swap: 16 hot-swap 2.5″ SATA3 drive bays Optional 6 U.2 NVMe drive support with additional cables
Optional: Optional slim DVD-ROM drive
Hybrid Backplane: Supports up to 8x 2.5″ SAS3/SATA3 HDD/SSD and 6x SAS3/SATA3/NVMe Storage Devices
Fans: 3 heavy-duty PWM fans with optimal fan speed control
Air Shroud: 1 Air Shroud
Total Output Power: 1000W/1200W
Dimension(W x H x L): 76 x 40 x 336 mm
Input: 100-127Vac / 15-12A / 50-60Hz 200-240Vac / 8.5-7A / 50-60Hz 200-240Vdc / 8.5-7A (for CCC only)
+12V: Max: 83A / Min: 0A (100-127Vac) Max: 100A / Min: 0A (200-240Vac) Max: 100A / Min: 0A (200-240Vdc)
+5Vsb: Max: 4A / Min: 0A
Output Type: 19 Pairs Gold Finger Connector
Certification: Titanium Level [ Test Report ]
CPU: Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 6-fan status tachometer monitoringUp to six 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 35°C (50°F to 95°F)Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)