A+ Server 2024US-TRT

AS -2024US-TRT: A+ Server 2024US-TRT
CPU: Dual AMD EPYC™ 7003/7002 Series Processors (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3 Supports CPU TDP up to 280W*
Cores: Up to 64 Cores
Chipset: System on Chip (SoC)
Note: * Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 32 DIMM slots Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus
Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
Graphics: ASPEED AST2500 BMC
2U: 2 PCI-E 4.0 x16 (FH, 10.5″ L) slots 1 PCI-E 4.0 x16 (FH, 9.5″ L) slot 1 PCI-E 4.0 x16 (LP) slot 1 PCI-E 4.0 x8 (FH, 9.5″ L, in x16) slot 1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
SATA: 12 SATA3 (6 Gbps) ports
LAN: Dual 10GBase-T LAN ports via Intel® X710-AT2 1 RJ45 Dedicated IPMI LAN port
USB: 3 USB 3.0 ports (2 rear + 1 Type A)
VGA: 1 VGA port
SAS: 12 SAS3 ports support via optional SAS kit
NVMe: 4 NVMe support via optional tray
Others: 1 COM port (rear) 2 SATA DOM power connectorTPM 1.2 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Form Factor: 2U
Model: CSE-829U2TS-R1K62P3-T
Height: 3.5″ (89mm)
Width: 17.2″ (437mm)
Depth: 28.46″ (723mm)
Package: 9.96″ (H) 24.60″ (W) 45.43″ (D)
Weight: Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Hot-swap: 12 hot-swap 3.5″ Drive Bays:12 SATA3 by default or 8 SATA3 + 4 NVMe via optional kit or 12 SAS3 via optional SAS kit
HDD Backplane: Supports 12 SATA3 or 8 SATA3 + 4 NVMe or 12 SAS3 HDD
Fans: 4 heavy-duty PWM fans with optimal fan speed control
Total Output Power: 1600W/1000W
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 13 — 9A / 50-60Hz 200-240Vac / 10 — 8A / 50-60Hz
+12V: Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification: Titanium Level [ Test Report ]
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 35°C (50°F to 95°F)*Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)
Note: * Support for operating 35°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details.