AS -2023US-TR4: A+ Server 2023US-TR4
CPU: Dual AMD EPYC™ 7001/7002* series Processors(* Board revision 2.x required) Socket SP3 Supports CPU cTDP up to 280W**
Cores: Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset: System on Chip (SoC)
Note: ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 32 DIMM slots Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*(* Board revision 2.x required + 7002 Processors)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
SATA: SATA3 (6 Gbps)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: Provided via Ultra Riser Card
VGA: ASPEED AST2500 BMC
2U: 1 PCI-E 3.0 x16 slot (FH, 10.5″ L) 5 PCI-E 3.0 x8 slots (FH, 9.5″ L) 1 PCI-E 3.0 x8 slot (LP) 1 PCI-E 3.0 x8 (internal proprietary LP slot)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
SATA: 12 SATA3 (6 Gbps) ports
LAN: Quad Gigabit LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 3 USB 3.0 ports (2 rear + 1 Type A)
VGA: 1 VGA port
SAS: 12 SAS3 ports support via optional Add-on Card
NVMe: 4 NVMe support with optional cables
Others: 1 COM port (rear) 2 SATA DOM power connectorTPM 1.2 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Form Factor: 2U
Model: CSE-829U2TS-R1K62P-T
Height: 3.5″ (89mm)
Width: 17.2″ (437mm)
Depth: 28.46″ (723mm)
Package: 9.96″ (H) 24.60″ (W) 45.43″ (D)
Weight: Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Hot-swap: 12 hot-swap 3.5″ Drive Bays:12 SATA3 by default Optional Drive Support: 8 SAS3 + 4 SAS3/NVMe2 rear hot-swap 2.5″ drive bays
HDD Backplane: Supports 12 SATA3 or 8 SATA3 + 4 NVMe or 12 SAS3 HDD
Fans: 4 heavy-duty PWM fans with optimal fan speed control
Total Output Power: 1600W/1000W
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 13 — 9A / 50-60Hz 200-240Vac / 10 — 8A / 50-60Hz
+12V: Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification: Titanium Level [ Test Report ]
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 8-fan status tachometer monitoringUp to eight 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 35°C (50°F to 95°F)Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)
Virtualization
Hyperconverge Storage
Cloud Computing
High End Enterprise Server
Flexible Networking Options
1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors)
8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
3. Expansion slots:
1 PCI-E 3.0 x16 slot (FH, 10.5″ L)
5 PCI-E 3.0 x8 slots (FH, 9.5″ L)
1 PCI-E 3.0 x8 slot (LP)
1 PCI-E 3.0 x8 (internal proprietary LP slot)
[ Details ]
4. Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License
key (SFT-OOB-LIC) included
for OOB BIOS management
5. Quad Gigabit LAN ports via Intel i350AM4
6. 12 hot-swap 3.5″ Drive Bays:
12 SATA3 by default
or 8 SATA3 + 4 NVMe
(optional supported)
or 12 SAS3
(SAS Add-on card is optional)
7. 1600W Redundant Power Supplies
Titanium Level (96%+)
(Full redundancy based on configuration and application load)
Part Number | Qty | Description |
AOC-S3008L-L8e | - | Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 122HDD, HBA |
2x CBL-SAST-0593 | Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |
AOC-S3008L-L8i | - | Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E |
2x CBL-SAST-0593 | Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |
AOC-S3108L-H8iR / 16DD | - | Std LP, 8 WIO L ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60 |
2x CBL-SAST-0593 | Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |
AOC-SAS3-9361-16I | - | MegaRAID SAS 9361-16i |
3x CBL-SAST-0593 | Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |
AOC-S3616L-L16IT | - | 16 int 12Gb/s ports, 16xGen3, IOC/IT mode - LP |
3x CBL-SAST-0593 | Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |
AOC-2UR66-I4G | 1 | 2U Ultra Riser with 4 GbE ports and 2 PCI-E x16 3.0, Intel i350 |
RSC-W2-66 | 1 | RSC-W2-66 |
FAN-0166L4 | 4 | 80x80x38 mm, 13.5K RPM, Optional Middle Cooling Fan for 2U Ultra Series Servers (Hot-swappable Version of FAN-0162L4) |
SNK-P0062P | 2 | 1U Passive CPU Heat Sink for AMD Socket SP3 Processors |
MCP-310-00091-0B | 1 | Ultra 2U GPU Air Shroud Kit for AMD |
BTR-TFM8G-LSICVM02 | - | CacheVault for Broadcom 3108 |
BKT-BBU-BRACKET-05 | Supercap mounting bracket for PCI-E location | |
BTR-TFM8G-LSICVM02 | - | CacheVault for Broadcom 3108 |
MCP-240-00127-0N | Supercap mounting bracket for 2.5" HDD location | |
MCP-220-00043-0N | STD Black hot-swap screw type 3.5"-to-2.5" converter drive tray | |
MCP-220-00043-0N | - | STD Black hot-swap screw type 3.5"-to-2.5" converter drive tray |
MCP-220-00118-0B | - | STD Black hot-swap tool-less 3.5"-to-2.5" converter drive tray. |
MCP-220-00116-0B | - | Black gen-5 3.5"-to-2.5" NVMe drive tray, Orange tab (for hotswap NVMe drive) |
CBL-SAST-0929 | OCuLink source to MiniSAS HD target V.91,INT,PCIe NVMe SSD, 57CM | |
MCP-220-00138-0B | - | Black gen-5.5 tool-less NVMe 3.5"-to-2.5" drive tray, Orange tab |
CBL-SAST-0929 | OCuLink source to MiniSAS HD target V.91,INT,PCIe NVMe SSD, 57CM | |
MCP-240-82922-0N-OEM | - | Rear 2x 2.5" HDDs riser bracket kit for SC829U/219U |
MCP-290-00128-0N &'
MCP-290-00127-0N |
1 | 2U Supermicro Cable Management Arm 2nd Gen |
MCP-210-82601-0B | - | |
RSC-UMR-8 | 1 | 1U Ultra RHS Riser Card with 1 PCI-E (up to 22110) |
MCP-120-82924-0n | ||
RSC-UMR-8 | 1 | 1U Ultra RHS Riser Card with 1 SATA M.2 (up to 22110) |
CBL-SAST-0639 | ||
MCP-120-82924-0n | ||
RSC-UMR-8 | 1 | 1U Ultra RHS Riser Card with 1 PCI-E/SATA Hybrid M.2 &' 1 PCI-E x8 (up to 2260 for each device) |
MCP-120-82924-0n | ||
CBL-SAST-0639 | ||
AOC-SLG3-2M2 | 1 | LP, PCIe3 x8, Dual port NVMe M.2 carrier |
AOM-TPM-9655V | - | Vertical TPM with Infineon 9655 TCG 1.2 |
AOM-TPM-9665V | - | AOM-TPM-9665V using SLB9665 Chipset supporing TPM2.0,RoHS/REACH |
OS4HR3/2/1 |
- | 3/2/1-year onsite 24x7x4 service |
OSNBD3/2/1 |
- | 3/2/1-year onsite NBD service |
SFT-DCMS-Single |
1 | DataCenter Management Package (per node license) |