A+ Server 1123US-TR4

AS -1123US-TR4: A+ Server 1123US-TR4
CPU: Dual AMD EPYC™ 7001/7002* series Processors(* Board revision 2.x required) Socket SP3 Supports CPU cTDP up to 280W**
Cores: Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset: System on Chip (SoC)
Note: ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
Memory Capacity: 32 DIMM slots Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*(* Board revision 2.x required + 7002 Processors)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
VGA: ASPEED AST2500 BMC
1U: 2 PCI-E x16 (FH/HL 9.5″) slots 2 PCI-E x8 slots (1 LP, 1 internal proprietary LP slot)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
SATA: 10 SATA3 (6 Gbps) ports
LAN: Quad Gigabit LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 5 USB 3.0 ports (2 rear + 2 via header + 1 Type A)
VGA: 1 VGA port
SAS: 8 SAS3 ports support via optional Add-on Card
NVMe: 2 NVMe support with optional cables
Others: 1 COM port (rear) 2 SATA DOM power connectorTPM 1.2 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Form Factor: 1U
Model: CSE-119UTS-R1K02P-T
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 28.5″ (724mm)
Package: 8.19″ (H) 23.86″ (W) 36.14″ (D)
Weight: Net Weight: 26 lbs (11.8 kg) Gross Weight: 41 lbs (18.6 g)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Hot-swap: 10 2.5″ hot-swap SATA3 or 8 SATA3 + 2 NVMe drive bays (optional)
HDD Backplane: Supports 10 SATA3 or 8 SATA3 + 2NVMe or 8 SAS3 + 2 SATA3 HDD
Fans: 8 heavy-duty PWM fans with optimal fan speed control
Air Shroud: 2 Air Shroud
Total Output Power: 800W/1000W
Dimension(W x H x L): 73.5 x 40 x 203 mm
Input: 100-127Vac / 9.8 — 7A / 50-60Hz 200-240Vac / 7 — 5A / 50-60Hz 200-240Vdc / 7 — 5A (for CCC only)
+12V: Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc)
12Vsb: Max: 2.1A / Min: 0A
Output Type: 25 Pairs Gold Finger Connector
Certification: Titanium Level [ Test Report ]
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 8-fan status tachometer monitoringUp to eight 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 35°C (50°F to 95°F)Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)