A+ Server 1113S-WN10RT

AS -1113S-WN10RT: A+ Server 1113S-WN10RT
CPU: Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W*
Cores: Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset: System on Chip (SoC)
Memory Capacity: 16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type: DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes: 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB*(* Board revision 2.x required + 7002 Processors)
Memory Voltage: 1.2V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers: Broadcom BCM57416 Controller
VGA: ASPEED AST2500 BMC
PCI Express: 2 PCI-E 3.0 x16 (FH/HL) slots 1 PCI-E 3.0 x16 (LP) slot
M.2: Interface: PCI-E 3.0 x2 (NVMe based) Form Factor: 2280, 22110 Key: Onboard M-key Number of M.2: Dual
NVMe: Up to 10 U.2 NVMe support
SATA: Optional 4 SATA3 (6 Gbps) support via additional cables
LAN: 2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB: 7 USB 3.0 ports (4 rear + 2 front + 1 Type A)
VGA: 1 VGA port
Others: 1 COM port 2 SATA DOM power connectorsTPM 1.2 header
BIOS Type: AMI 128Mb SPI Flash EEPROM
BIOS Features: Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1
Form Factor: 1U
Model: CSE-116TS-R706WBP3
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 23.5″ (597mm)
Package: 7.63″ (H) 23.42″ (W) 31.45″ (D)
Weight: Net Weight: 20 lbs (9.1 kg) Gross Weight: 33 lbs (15.0 kg)
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED
Hot-swap: 10 hot-swap 2.5″ U.2 NVMe drive bays
Hybrid Backplane: Supports up to 10x 2.5″ NVMe storage devices, 4 of them SAS3/SATA3 compatible
Fans: 6 heavy-duty PWM fans with optimal fan speed control
Air Shroud: 1 Air Shroud
Total Output Power: 700W/750W
Dimension(W x H x L): 54.5 x 40.25 x 320 mm
Input: 100 — 140Vac / 8 — 6A / 50-60Hz 200 — 240Vac / 4.5 — 3.8A / 50-60Hz 200 — 240Vdc / 4.5 — 3.8A (CCC Only)
+12V: Max: 58A / Min: 0.5A (100 — 140Vac) Max: 62A / Min: 0.5A (200 — 240Vac) Max: 62A / Min: 0.5A (200 — 240Vdc)(CB/CCC Only)
+5V sb: Max: 3A / Min: 0A
Output Type: Gold Finger Connector Mating with Molex 45984-4343
Certification: Platinum Certified [ Test Report ]
CPU: Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN: Up to 6-fan status tachometer monitoringUp to six 4-pin fan headersStatus monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED: CPU / System Overheat LED
Other Features: Chassis Intrusion Detection Chassis Intrusion Header
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C to 30°C (50°F to 86°F)Non-operating Temperature:-40°C to 70°C (-40°F to 158°F)Operating Relative Humidity:8% to 90% (non-condensing)Non-operating Relative Humidity:5% to 95% (non-condensing)