SYS-5019GP-TT: SuperServer 5019GP-TT
CPU: Single Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors Support CPU TDP 70-205W
Cores: Up to 28 Cores
Note: BIOS version 3.2or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
Supported GPUs: 2 Double-Width/Single-Width PCI-E 3.0 x16 Card (Full Height Full Length) NVIDIA V100, M10, T4, Quadro RTX Supports both active and passive cooled GPUs Compatible GPU list
CPU-GPU Interconnect: PCI-E Gen 3 x16 Switch CPU-GPU Interconnect
Memory Capacity: 6 DIMM slots Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type: 2933 /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note: 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.
Chipset: Intel® C621 chipset
SATA: SATA3 (6Gbps) with RAID 0, 1, 5, 10
Network Connectivity: Intel® X550 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI: Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics: ASPEED AST2500
SATA: 6 SATA3 (6Gbps) ports
LAN: 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port
USB: 2 USB 3.0 ports (rear) 2 USB 2.0 ports (rear)
Video: 1 VGA port
Serial Port: 1 Fast UART 16550 header
DOM: 2 DOM (Disk on Module) power connectors
BIOS Type: AMI 32Mb SPI Flash ROM
Software: Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations: ACPI / APM Power Management
CPU: Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN: Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment Thermal Control for fan connectors
Form Factor: 1U Rackmount
Model: CSE-818GTS-1K43BP2
Height: 1.7″ (43mm)
Width: 17.2″ (437mm)
Depth: 28.2″ (716mm)
Weight: Net Weight: 28 lbs (12.70 kg) Gross Weight: 36 lbs (16.33 kg)
Available Color: Black
Buttons: Power On/Off button System Reset button
LEDs: Power LED Hard drive activity LED Network activity LEDs System Overheat LED / Fan fail LED
PCI-Express: 2 PCI-E 3.0 x16 (FHFL) slots — supporting up to 2 GPUs 1 PCI-E 3.0 x16 slot (left riser)
Hot-swap: 3 Hot-swap 3.5″ SAS/SATA drive bays
M.2: Supports 2 M.2 form factor 2280 Supports both M.2 NVMe and SATA SSD
Peripheral Bay(s): 1 slim DVD-ROM drive bay or 1 USB + COM port tray
Fans: 8 heavy duty counter-rotating 4cm fans with air shroud and optimal fan speed control
AC Voltage: 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby: 6 Amp
+12V: 100 Amp/115 Vac 117 Amp/230 Vac
With Power Distributor: +5V: 14 Amp
Certification: Platinum Certified
RoHS: RoHS Compliant
Environmental Spec.: Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)
SuperServer 5019GP-TT
— Edge Computing
— Micro Data Center
— AI/ML, Deep Learning Training and Inference
— Virtualization
— Cloud Computing
Key Features
1. Supports up to 2 Active/Passive
Cooling NVIDIA® GPUs in 1U
2. Single Socket P (LGA 3647) supports
2nd Gen Intel® Xeon® Scalable
processor (Cascade Lake/Skylake)
3. 6 DIMMs’ up to 1.5TB 3DS ECC
DDR4-2933MHz RDIMM/LRDIMM,
Supports Intel® Optane™ DCPMM
4. 2 PCI-E 3.0 x16 slots (support
double-width GPU), 1 PCI-E 3.0 x16
low-profile slot (center left)
5. 3 Hot-swap 3.5″ SAS/SATA drive bays,
1 slim DVD-ROM drive bay
6. 2x 10GBase-T LAN ports via Intel X550
7. 2 M.2 form factor 2280, supports
both M.2 NVMe and SATA SSD
8. 8 Heavy duty 4cm counter-rotating
4cm fans with air shroud &’ optimal fan
speed control
9. 1400W High-efficiency Power Supply
Platinum Level (94%+)